Surface roughness of photoacrylic resin shapes obtained using PolyJet additive technology

Paweł  Turek; Anna  Bazan; Grzegorz Budzik; Łukasz  Przeszłowski; Bartosz  Gapiński

doi:10.14314/polimery.2023.11.7

Published : 2023-12-18

Vol. 68 No. 11-12 (2023)

Surface roughness of photoacrylic resin shapes obtained using PolyJet additive technology

Paweł Turek https://orcid.org/0000-0002-5926-4815 Anna Bazan https://orcid.org/0000-0002-0642-3958 Grzegorz Budzik https://orcid.org/0000-0003-3598-2860 Łukasz Przeszłowski https://orcid.org/0000-0002-1212-9069 Bartosz Gapiński https://orcid.org/0000-0003-0206-1942

DOI: https://doi.org/10.14314/polimery.2023.11.7

Abstract

The article presents the results of analyzing the surface roughness of samples manufactured using the PolyJet additive technology. Three types of photopolyacrylic resins were used in the production process of the test samples. The samples were measured using stylus and optical measurement methods. The presented research extends information on the surface roughness of resins used in the PolyJet 3D printing process. It is a starting point for further improvement of measurement procedures for polymer materials.

Keywords

additive techniques ; polymer materials ; surface roughness ; stylus measurements ; optical measurements techniki przyrostowe ; materiały polimerowe ; chropowatość powierzchni ; pomiary stykowe ; pomiary optyczne

Details

References

Statistics

Authors

Download files

pdf

Zasady cytowania

Turek, P. ., Bazan, A. ., Budzik, G., Przeszłowski, Łukasz ., & Gapiński, B. . (2023). Surface roughness of photoacrylic resin shapes obtained using PolyJet additive technology. Polimery, 68(11-12), 631-639. https://doi.org/10.14314/polimery.2023.11.7

References

Thompson M.K., Moroni G., Vaneker T. et al.: CJRP Annals 2016, 65, 737.
Crossref Google Scholar

Gibson I., Rosen D.S.B.: “Additive Manufacturing Technologies” Springer-Verlag, New York, New York 2014. Google Scholar

ISO/ASTM 52900 Additive manufacturing — General principles — Fundamentals and vocabulary. ISO, Geneva, Switzerland, 2021. Google Scholar

ISO/ASTM 52910 Additive Manufacturing—Design—Requirements, Guidelines and Recommendations. ISO, Geneva, Switzerland, 2018. Google Scholar

Gisario A., Kazarian M., Martina F. et al.: Journal of Manufacturing Systems 2019, 53, 124.
Crossref Google Scholar

Rokicki P., Budzik G., Kubiak K. et al.: Aircraft Engineering and Aerospace Technology 2016, 88, 374.
Crossref Google Scholar

Leal R., Barreiros F.M., Alves L. et al.: The International Journey of Advanced Manufacturing Technology 2017, 92, 1671.
Crossref Google Scholar

Ciocca L., Mazzoni S., Fantini M. et al.: Medical and Biological Engineering and Computing 2012, 50, 743.
Crossref Google Scholar

Turek P., Budzik G., Oleksy M. et al.: Polimery 2020, 65(7-8), 510.
Crossref Google Scholar

Chen L., Lin W.S., Polido W.D. et al.: The Journal of Prosthetic Dentistry 2019, 122(3), 309.
Crossref Google Scholar

Shim J.S., Kim J.E., Jeong S.H. et al.: The Journal of Prosthetic Dentistry 2020, 124(4), 46M75,
Crossref Google Scholar

Budzik G., Woźniak J., Paszkiewicz A. et al.: Materials 2021, 14(9), 2202.
Crossref Google Scholar

Turek P., Budzik G.: Polymers 2021, 13(14), 2271.
Crossref Google Scholar

Jawade S., Kakandikar G.: Journal of Electrochemical Science and Engineering 2023, 13(1), 127.
Crossref Google Scholar

Majeed A., Ahmed A., Salam A. et al.: International Journal of Lightweight Materials and Manufacture 2019, 2(4), 288.
Crossref Google Scholar

Golhin A. P., Tonello R., Frisvad J. R. et al.: The International Journal of Advanced Manufacturing Technology 2023, 127, 987.
Crossref Google Scholar

Gülcan O., Günaydın K., Çelik A.: Aerospace 2022, 9(2), 82.
Crossref Google Scholar

Pandey P., Nayak A., Taufik M.: Advances in Materials and Processing Technologies 2022, 1,
Crossref Google Scholar

Wei X., Thakare K., Zeng L., Pei Z.: “Experimetal Investigation of Stratasys J750 PolyJet Printer: Effects of Finish Type and Shore Hardness on Dimensional Accuracy” in “Proceedings of the ASME 2019 14th International Manufacturing Science and Engineering Conference. Volume 2” Processes; Materials” Erie, Pennsylvania 2019.
Crossref Google Scholar

Junk S., Schrock S., Schmieder N.: “International Conference on Additive Manufacturing in Products and Applications 2023”, Springer Cham, Switzerland 2023. p. 35.
Crossref Google Scholar

Vieten T., Stahl D., Schilling P., Civelek F. et al.: Micromachines 2021, 12(7), 730.
Crossref Google Scholar

Turek P., Budzik G., Sęp J. et al.: Polymers 2020, 12(12), 3029.
Crossref Google Scholar

Herschdorfer L., Negreiros W.M., Gallucci G.O. et al.: The Journal of Prosthetic Dentistry 2021, 125(6), 905.
Crossref Google Scholar

Yap Y.L., Wang C., Sing S.L. et al.: Precision Engineering 2017, 50, 275.
Crossref Google Scholar

Yang H., Lim J. C., Liu Y., Qi X. et al.: Virtual and physical prototyping 2017, 12, 95.
Crossref Google Scholar

Khoshkhoo A., Carrano A.L., Blersch D.M.: Rapid Prototyping Journal 2018, 24, 1563.
Crossref Google Scholar

Kumar K., Kumar G.S.: Virtual and Physical Prototyping 2015, 10, 23.
Crossref Google Scholar

Udroiu R., Braga I.C., Nedelcu A.: Materials 2019, 12, 995.
Crossref Google Scholar

Holman R. K., Cima M. J., Uhland S. A. et al.: Journal of Colloid and Interface Science 2002, 249, 432.
Crossref Google Scholar

Udroiu R., Mihail L. A.: „Experimental determination of surface roughness of parts obtained by rapid prototyping”. Proceedings of the 8th WSEAS International Conference on Circuits, Systems, Electronics, Control & Signal processing (CSECS'09), p. 283. Google Scholar

ISO 21920-2 Geometrical product specifications (GPS) Surface texture: Profile Part 2: Terms, definition and surface texture parameters, ISO, Geneva, Switzerland, 2021. Google Scholar

ISO 25178-2 Geometrical product specifications (GPS) — Surface texture: Areal — Part 2: Terms, definitions and surface texture parameters, ISO, Geneva, Switzerland, 2021. Google Scholar

Pawlus P., Reizer R., Wieczorowski. M.: Metrology and Measurement Systems 2018, 25, 589.
Crossref Google Scholar

Pawlus P.: Measurement 2007, 40(6), 672.
Crossref Google Scholar

Pawlus P., Reizer R., Wieczorowski M.: Metrology and Measurement Systems 2017, 24, 525.
Crossref Google Scholar

ISO 3274 Geometrical Product Specifications (GPS) — Surface texture: Profile method — Nominal characteristics of contact (stylus) instruments, ISO, Geneva, Switzerland, 1996. Google Scholar

Bazan A., Kawalec A., Rydzak T. et al.: Materials 2020, 14, 6.
Crossref Google Scholar

Launhardt M., Wörz A., Loderer A. et al.: Polymer Testing 2016, 53, 217.
Crossref Google Scholar

Zhang X., Zheng Y., Suresh V. et al.: Journal of Manufacturing Processes 2020, 53, 310.
Crossref Google Scholar

Leach R.: „Advances in Optical Surface Texture Metrology”, IOP Publishing Ltd, Bristol 2020.
Crossref Google Scholar

Leach R.: „Optical Measurement of Surface Topography”, Springer Berlin, Heidelberg 2011.
Crossref Google Scholar

Bazan A., Turek P., Przeszłowski Ł.: Journal of Mechanical Science and Technology 2021, 35, 1167.
Crossref Google Scholar

Bazan A., Turek P., Sułkowicz P. et al.: Machines 2023, 11(6), 615.
Crossref Google Scholar

Bezak T., Kusy M., Elias M. et al.: Applied Mechanics and Materials 2014, 693, 329.
Crossref Google Scholar

Zheng Y., Zhang X., Wang S. et al.: Optics and Lasers in Engineering 2020, 126, 105920.
Crossref Google Scholar

Newton L., Senin N., Gomez C., Danzl R. et al.: Additive Manufacturing 2019, 25, 365.
Crossref Google Scholar

Danzl R., Helmli F., Scherer S.: Strojniśki vestnik — Journal of Mechanical Engineering 2011, 57, 245.
Crossref Google Scholar

Triantaphyllou A., Giusca C.L., Macaulay G.D. et al.: Surface Topography: Metrology and Properties 2015, 3, 024002,
Crossref Google Scholar

Yang H., Lim J.C., Liu Y. et al.: Virtual and Physical Prototyping 2017, 12, 95.
Crossref Google Scholar

Zmarzły P., Kozior T., Gogolewski D.: Tehnički vjesnik 2019, 26(6), 1576.
Crossref Google Scholar

Bazan A., Turek P., Przeszłowski Ł.: Surface Topography: Metrology and Properties 2022, 10, 035021.
Crossref Google Scholar

Altmetric indicators

Citing articles via

CITEDBY SCOPUS

Statistics

Total abstract views : 88

PDF Downloads : 53

Paweł Turek pturek@prz.edu.pl
https://orcid.org/0000-0002-5926-4815

Affiliation
Rzeszów University of Technology, Faculty of Mechanical Engineering and Aeronautics, Department of Manufacturing Techniques and Automation

Anna Bazan
https://orcid.org/0000-0002-0642-3958

Affiliation
Rzeszów University of Technology, Faculty of Mechanical Engineering and Aeronautics, Department of Manufacturing Techniques and Automation, al. Powstańców Warszawy 8, 35-959 Rzeszów, Poland

Grzegorz Budzik
https://orcid.org/0000-0003-3598-2860

Affiliation
Rzeszów University of Technology, Faculty of Mechanical Engineering and Aeronautics, Department of Mechanical Engineering, al. Powstańców Warszawy 8, 35-959 Rzeszów, Poland

Łukasz Przeszłowski
https://orcid.org/0000-0002-1212-9069

Affiliation
Rzeszów University of Technology, Faculty of Mechanical Engineering and Aeronautics, Department of Mechanical Engineering, al. Powstańców Warszawy 8, 35-959 Rzeszów, Poland

Bartosz Gapiński
https://orcid.org/0000-0003-0206-1942

Affiliation
Poznan University of Technology, Faculty of Mechanical Engineering, Institute of Mechanical Technology, 5 M. Sklodowska-Curie Square, 60-965 Poznan, Poland