Kompozyty żywic poliuretanowych z dodatkiem Nanobentów ®

M. Oleksy; G. Budzik; M. Heneczkowski; T. Markowski

Published : 2010-03-30

Vol. 55 No. 3 (2010)

Composites of Nanobent ® filled polyurethane resins

M. Oleksy G. Budzik M. Heneczkowski T. Markowski

Abstract

The preparation of composites based on polyurethane resins (RenPIM-VG 5234, 5286 and 5287 as well as RenCast FC55) applicable in vacuum casting filled with 0-3 wt. % of the nanofiller Nanobent ® ZR1 or ZR2 (Table 1, Fig. 1) has been presented. The chosen polyol was homogenized at various temperatures by using either an ultrasound bath, a high-speed homogenizer or a combination of both. The influence of the type and amount of nanofiller, temperature and dispersion method on the mechanical properties of the obtained nanocomposites (Tables 2-4) as well as on the morphology of their surfaces (Figs. 2 and 3) was examined. Nanocomposites comprising of 3 wt. % of NanoBent ® ZR1 in the matrix of RenPIM-VG 5286 exhibited optimal rigidity, resistance and fine-platelet morphology properties.

Keywords

żywica poliuretanowa ; glinokrzemiany ; Nanobenty ; właściwości mechaniczne ; morfologia polyurethane resin ; aluminosilicates ; mechanical properties ; morphology

Similar Articles

J. Łukasiak, A. Dorosz, M. Prokopowicz, K. Raczyńska, B. Palkiewicz, Emulsificatin and other physicochemical changes in polydimethylsiloxanes (PDMS) exposed to model systems representing eye-ball tissue, human blood serum and collagen , Polimery: Vol. 46 No. 6 (2001)
L. Jarecki, Computer modeling of melt spinning from a crystallizing polymer. Part II. Applications of the mathematical model , Polimery: Vol. 46 No. 6 (2001)
E. Novikova, A. Kolendo, V. Syromyatnikov, T. Prot, K. Golec, Azidoxanthone and azidofluorane-photoinitiated polymerizations of methyl methacrylate , Polimery: Vol. 46 No. 6 (2001)
A. Prociak, J. Pielichowski, Possibility of application of polyurethane foam wastes for heat-insulating materials preparation , Polimery: Vol. 50 No. 9 (2005)
W. Zatorski, Z. K. Brzozowski, K. Łebek, Production of PUR and PUR-PIR foams with red phosphorus as a flame retardant , Polimery: Vol. 50 No. 9 (2005)
Z. Flisak, K. Szczegot, Complexes of transition metals with Lewis bases as precursors of olefin polymerization catalysts. Part II. Advance in computer-assisted design of catalysts , Polimery: Vol. 46 No. 6 (2001)
W. M. Rzymski, M. Mikrut, J. Magryta, B. Wolska, Curing of acrylonitrile-butadiene rubber with tetraisobutylthiuram disulfide , Polimery: Vol. 50 No. 10 (2005)
S.A. Kurta, S.V. Fedorchenko, M.V. Chaber, Investigation of the stability of the modified urea-formaldehyde resin , Polimery: Vol. 49 No. 1 (2004)

<< < 110 111 112 113 114 115

You may also start an advanced similarity search for this article.

Details

References

Statistics

Authors

Download files

PDF (Język Polski)

Zasady cytowania

Oleksy, M., Budzik, G., Heneczkowski, M., & Markowski, T. (2010). Composites of Nanobent ® filled polyurethane resins. Polimery, 55(3), 194–200. Retrieved from https://polimery.ichp.vot.pl/index.php/p/article/view/1001

References

Alexandre M., Dubois P.: Mater. Sci. Eng. 2000, 28, l.

2. Duquesne S., Le Bras M., Bourbigot S., Delobel R., Camino G., Eling B., Lindsay Ch., Roels T.: Polym. Degrad. Stab. 2001, 74, 493.

3. Lefebvre J., Bastin B., Le Bras M., Duąuesne S., Paleja R., Delobel R.: Polym. Degrad. Stab. 2005, 88, 28.

4. Tortora M., Gorrasi G., Yittoria V., Galii G., Ritrovati S., Chiellini E.: Polymer 2002, 43, 6147.

5. Chen T. K., Tien Y. L, Wie K. H.: Polymer 2000, 41, 1345.

6. Bereta M., Lindsay C., Pans G., Camino G.: Polym. Degrad. Stab. 2006, 91, 1179.

7. Le Baron P. C., Wang Z., Pinnavaia T. J.: Appl. Clay Sci. 1999, 15, 11.

8. Yao K. J., Song M., Houston D. J, Luo D. Z.: Polymer 2002, 43, 1017.

9. Rebab A., Salahuddin N.: Mater. Sci. Eng. A 2005, 399, 368.

10. Wang Z.’, Pinnavaia T. J.: Chem. Mater. 1998, 10, 3769.

11. Berta M., Lindsay C., Pans G., Camino G.: Polym. Degrad. Stab. 2006, 91, 1179.

12. Chen T. K., Tien Y. L, Wei K. H.: Polymer 2000, 41, 1345.

13. Tien Y. L, Wei K. H.: Polymer 2001, 42, 3213.

14. Biswas M., Ray S. S.: Adv. Polym. Sci. 2001, 155, 167.

15. Zawada A., Boczkowska A., Ziemkowska W., Kunicki A., Pietrzykowski A., Olszyna A.: Kompozyty 2006, 1, 79.

16. Boczkowska A., Marczewski M., Sienkiewicz B., Pietrzykowski A., Kunicki A., Ziemkowska W, Zawada A., Olszyna A.: Inż. mater. 2006, 6, 1323.

17. Ryszkowska J., Jurczyk-Kowalska M., Dębowski M., Florjańczyk Z., Kurzydłowski K. J.: Inż. mater. 2006, 6, 1315.

18. Kuan H, C., Chuang W. P, Ma C. C., Chiang C. L., Wu H. L.: J. Mater. Sci. 2005, 40, 179.

19. Corcione C. E., Prinari P, Cannoletta D., Mensiteri G., Maffezzoli A.: Int. J. Adhes. Adhes. 2008,2 8, 91.

20. Oleksy M., Heneczkowski M., Galina H.: J. Appl. Polym. Sci. 2005, 3, 793.

21. Oleksy M., Heneczkowski M., Galina H.: Polimery 2007, 52, 345.

22. Oleksy M., Heneczkowski M., Budzik G.: Polimery 2008, 53, 60.

23. Sobolak M., Budzik G.: Rapid Prototyping J. 2008, 14, 197.

24. Budzik G., Marciniec A., Markowski T, Oleksy M., Cygnar M.: Archio. Foundry Eng. 2009, 9, 137.

25. Żywice narzędziowe i modelarskie, Katalog produktów firmy Huntsman.

26. Polyurethanes, http://www.mouldlife.co.uk

Google Scholar

Citing articles via

Statistics

Total abstract views : 0

PDF Downloads : 0

M. Oleksy polimery@ichp.pl

G. Budzik

M. Heneczkowski

T. Markowski