Composites of unsaturated polyester resins applied in vacuum casting technology

M. Oleksy; M. Heneczkowski; G. Budzik

Published : 2022-08-23

Vol. 53 No. 2 (2008)

Composites of unsaturated polyester resins applied in vacuum casting technology

M. Oleksy M. Heneczkowski G. Budzik

Abstract

The paper deals with hydrophobization of bentonites (layered aluminosilicates) with quaternary ammonium salts (QAS) and potential application of the products obtained as fillers for preaccelerated unsaturated polyester resins (UPs) to be applied in vacuum casting. Natural purified bentonites of "Special" and "SN" type, enriched with montmorillonite and modified with QAS according to the earlier patented method were used. An addition of modified bentonites (1.5 or 3.0phr) to commercial preaccelerated UPs, caused a considerable improvement in mechanical properties (tensile strength, Brinell hardness and Charpy impact strength). Also, a clear effect of nanofiller concentration in resin on the quality of cast products was observed.

Keywords

preakcelerowana nienasycona żywica poliestrowa ; bentonity ; organogliny ; nanocząstki ; nanokompozyty ; właściwości mechaniczne ; odlewanie próżniowe preaccelerated unsaturated polyester resin ; bentonites ; organic aluminum compounds ; nanoparticles ; nanocomposites ; mechanical properties ; vacuum casting

Similar Articles

A. Białkowska, Z. Wirpsza, Rigid segments of condensation polyetherurethanes , Polimery: Vol. 47 No. 10 (2002)
J. Paciorek-Sadowska, B. Czupryński, J. Liszkowska, W. Jaskółowski, New polyol for the production of rigid polyurethane-polyisocyanurate foams. Part II. Preparation of rigid polyurethane-polyisocyanurate foams with use of new boroorganic polyol , Polimery: Vol. 55 No. 2 (2010)
J. Lubczak, Polyetherols with purine ring , Polimery: Vol. 50 No. 11-12 (2005)
D. Bogdał, I. Stępień, J. Santera, E. Gondek, Microwave-assisted synthesis and copolymerization of photo- and electroluminescent methacrylates containing carbazole and coumarin pendant groups , Polimery: Vol. 48 No. 2 (2003)
B. Krywult, Pultrusion as an effective method for making semifinished products from glass fiber-reinforced plastics (GRP) , Polimery: Vol. 46 No. 10 (2001)
J. Polaczek, E. Dziki, J. Pielichowski, Properties and synthesis of poly(aspartic acid) and its derivatives , Polimery: Vol. 48 No. 1 (2003)
K. German, Selected problems in the pyrolysis of waste polymers. Part I. The problem related to the presence of chlorine in pyrolytic oils from the view point of the present state of knowledge , Polimery: Vol. 55 No. 5 (2010)
T. Azdast, A. H. Behravesh, K. Mazaheri, Numerical simulation and experimental validation of residual stress induced constrained shrinkage of injection molded parts , Polimery: Vol. 53 No. 4 (2008)
M. Białek, K. Czaja, Metal salen complexes as ethylene polymerization catalysts - effect of catalytic system composition on its activity and properties of polymerization products , Polimery: Vol. 53 No. 5 (2008)
B. Czupryński, J. Liszkowska, J. Paciorek-Sadowska, Glycolysis of rigid polyurethane-polyisocyanurate foams , Polimery: Vol. 55 No. 4 (2010)

<< < 92 93 94 95 96 97 98 99 100 101 > >>

You may also start an advanced similarity search for this article.

Details

References

Statistics

Authors

Download files

PDF

Zasady cytowania

Oleksy, M., Heneczkowski, M., & Budzik, G. (2022). Composites of unsaturated polyester resins applied in vacuum casting technology. Polimery, 53(2), 144–147. Retrieved from https://polimery.ichp.vot.pl/index.php/p/article/view/1296

Altmetric indicators

Citing articles via

Statistics

Total abstract views : 0

PDF Downloads : 0

M. Oleksy molek@prz.rzeszow.pl

Affiliation
Rzeszow University of Technology, Faculty of Chemistry, Department of Polymer, 35-959 Rzeszow, Poland

M. Heneczkowski

G. Budzik