Effect of extruder parameters on mechanical properties of revulcanized ground rubber tire powder

B. Maridass; B. R. Gupta

Published : 2022-08-26

Vol. 52 No. 6 (2007)

Effect of extruder parameters on mechanical properties of revulcanized ground rubber tire powder

B. Maridass B. R. Gupta

Abstract

Response Surface Methodology (RSM) was used to study the effects of processing parameters viz. barrel temperature and screw speed on the mechanical properties of revulcanized waste ground rubber tire powder from a counter rotating twin screw extruder. Central composite rotatable design (CCRD) for two variables at five levels was chosen as the experimental design. The following parameters were analyzed: rheometric maximum torque, tensile strength, elongation at break, stress at 100% elongation, hardness and tear strength. The results obtained after measuring the responses were fitted as two variable second order equations which were confirmed experimentally. Barrel temperature is found to be the more influencing factor than the screw speed. Optimum properties were predicted at temperature 197°C and screw speed 25rpm.

Keywords

wytłaczarka dwuślimakowa ; plan eksperymentu ; metodologia analizy powierzchni odpowiedzi ; rewulkanizacja ; odpady z opon gumowych ; właściwości mechaniczne twin screw extruder ; design of experiments ; response surface methodology ; revulcanization ; waste ground rubber tire ; mechanical properties

Similar Articles

K. Szczegot, Z. Flisak, I. Sibelska, B. Dawidowska-Marynowicz, Transition metal chlorides complexes with tetrahydrofuran [MtCl(4)(THF)(2)] used as precursors of ethylene polymerization , Polimery: Vol. 47 No. 2 (2002)
M. Białek, A. Utrata, K. Czaja, Studies on ethyl ene/1-hexene copolymerization over the zirconocene catalyst supported on MAO-modified MgCl2(THF)(2) , Polimery: Vol. 47 No. 1 (2002)
A. Borowska, T. Sterzyński, K. Piszczek, Estimation of degradation of PVC-U subjected to photooxidating accelerating ageing , Polimery: Vol. 55 No. 4 (2010)
A. Bajorek, J. Pączkowski, Spectroscopic probes. Influence of polymeric chain on photophysical properties of molecules exhibiting the presence of the tict state. Part II. The kinetics , Polimery: Vol. 46 No. 1 (2001)
W Skupiński, K. Niciński, The effect of the number and nature of phenoxy group substituents on the activity and selectivity of CpTiCl3-n(OC6H5-mXm)n/MAO catalyst systems in syndiotactic polymerization of styrene , Polimery: Vol. 47 No. 1 (2002)
B. Gutarowska, B. Brycki, K. Majchrzycka, A. Brochocka, New bioactive polymer filtering material composed of nonwoven polypropylene containing alkylammonium microbiocides on a perlite carrier , Polimery: Vol. 55 No. 7-8 (2010)
G. Gorczyca, R. Tylingo, Natural polymers in designing modern medical materials with antimicrobial properties. Part II, Antimicrobial activation methods for medical materials , Polimery: Vol. 56 No. 11-12 (2011)
B. Czupryński, J. Liszkowska, J. Paciorek-Sadowska, Modifdication of rigid polyurethane-polyisocyanurate foam with selected powder fillers , Polimery: Vol. 53 No. 2 (2008)
E. Witek, Crosslinking copolymerization of N-vinylformamide in inverse suspension , Polimery: Vol. 53 No. 6 (2008)
R. N. Darie, C. Vasile, M. Kozłowski, The effect of compatibilization in reactive processing low density polyethylene/polyamide 6/EPDM blends , Polimery: Vol. 51 No. 9 (2006)

<< < 116 117 118 119 120 121 122 123 124 125 > >>

You may also start an advanced similarity search for this article.

Details

References

Statistics

Authors

Download files

PDF

Zasady cytowania

Maridass, B., & Gupta, B. R. (2022). Effect of extruder parameters on mechanical properties of revulcanized ground rubber tire powder. Polimery, 52(6), 456–460. Retrieved from https://polimery.ichp.vot.pl/index.php/p/article/view/1439

Altmetric indicators

Citing articles via

Statistics

Total abstract views : 0

PDF Downloads : 0