Effect of extruder parameters on mechanical properties of revulcanized ground rubber tire powder

B. Maridass; B. R. Gupta

Published : 2022-08-26

Vol. 52 No. 6 (2007)

Effect of extruder parameters on mechanical properties of revulcanized ground rubber tire powder

B. Maridass B. R. Gupta

Abstract

Response Surface Methodology (RSM) was used to study the effects of processing parameters viz. barrel temperature and screw speed on the mechanical properties of revulcanized waste ground rubber tire powder from a counter rotating twin screw extruder. Central composite rotatable design (CCRD) for two variables at five levels was chosen as the experimental design. The following parameters were analyzed: rheometric maximum torque, tensile strength, elongation at break, stress at 100% elongation, hardness and tear strength. The results obtained after measuring the responses were fitted as two variable second order equations which were confirmed experimentally. Barrel temperature is found to be the more influencing factor than the screw speed. Optimum properties were predicted at temperature 197°C and screw speed 25rpm.

Keywords

wytłaczarka dwuślimakowa ; plan eksperymentu ; metodologia analizy powierzchni odpowiedzi ; rewulkanizacja ; odpady z opon gumowych ; właściwości mechaniczne twin screw extruder ; design of experiments ; response surface methodology ; revulcanization ; waste ground rubber tire ; mechanical properties

Similar Articles

I. Fortelný, M. Lapčíková, F. Lednický, Z. Starý, Z. Kruliš, Non-uniform phase structure in immiscible polymer blends - reasons and consequences , Polimery: Vol. 54 No. 2 (2009)
M. Paturej, M. El Fray, Application of combinatorial chemistry and high-throughput methods in the syntheses and investigations of polymer materials , Polimery: Vol. 54 No. 3 (2009)
J. Michalak, Polymer modified factory-made dry mortars as modern building materials , Polimery: Vol. 49 No. 5 (2004)
G. Janowska, W.M. Rzymski, M. Kmiotek, A. Kucharska, A. Kasiczak, Thermal properties and combustibility of chlorosulfonated polyethylene , Polimery: Vol. 54 No. 4 (2009)
W. Zatorski, Z. K. Brzozowski, K. Łebek, Production of PUR and PUR-PIR foams with red phosphorus as a flame retardant , Polimery: Vol. 50 No. 9 (2005)
A.O. Tretyakov, Mathematical model of friction wear process on the example of polymer composites on the basis of phenol-formaldehyde resins , Polimery: Vol. 49 No. 4 (2004)
J. Janicki, S. Rabiej, A. Włochowicz, Synchrotron investigations of polyethylene materials nanostructures , Polimery: Vol. 49 No. 4 (2004)
I. Kaya, S. Çulhaoglu, Syntheses, structures and properties of novel oligo(azomethine ether)s containing or not chlorine atoms in the main chain , Polimery: Vol. 54 No. 4 (2009)
P. Król, B. Król, Polyurethane ionomers. Part II. Preparation, structure, properties and applications of polyurethane cationic dispersions , Polimery: Vol. 49 No. 9 (2004)
J. Stabik, Effect of geometrical features of fillers particles on viscosity of polyethylene or polystyrene in melt , Polimery: Vol. 49 No. 9 (2004)

<< < 124 125 126 127 128 129 130 131 132 133 > >>

You may also start an advanced similarity search for this article.

Details

References

Statistics

Authors

Download files

PDF

Zasady cytowania

Maridass, B., & Gupta, B. R. (2022). Effect of extruder parameters on mechanical properties of revulcanized ground rubber tire powder. Polimery, 52(6), 456–460. Retrieved from https://polimery.ichp.vot.pl/index.php/p/article/view/1439

Altmetric indicators

Citing articles via

Statistics

Total abstract views : 0

PDF Downloads : 0