Effect of extruder parameters on mechanical properties of revulcanized ground rubber tire powder

B. Maridass; B. R. Gupta

Published : 2022-08-26

Vol. 52 No. 6 (2007)

Effect of extruder parameters on mechanical properties of revulcanized ground rubber tire powder

B. Maridass B. R. Gupta

Abstract

Response Surface Methodology (RSM) was used to study the effects of processing parameters viz. barrel temperature and screw speed on the mechanical properties of revulcanized waste ground rubber tire powder from a counter rotating twin screw extruder. Central composite rotatable design (CCRD) for two variables at five levels was chosen as the experimental design. The following parameters were analyzed: rheometric maximum torque, tensile strength, elongation at break, stress at 100% elongation, hardness and tear strength. The results obtained after measuring the responses were fitted as two variable second order equations which were confirmed experimentally. Barrel temperature is found to be the more influencing factor than the screw speed. Optimum properties were predicted at temperature 197°C and screw speed 25rpm.

Keywords

wytłaczarka dwuślimakowa ; plan eksperymentu ; metodologia analizy powierzchni odpowiedzi ; rewulkanizacja ; odpady z opon gumowych ; właściwości mechaniczne twin screw extruder ; design of experiments ; response surface methodology ; revulcanization ; waste ground rubber tire ; mechanical properties

Similar Articles

T. Rusiecki, R. Steller, Study on the solid-state shear pulverization process in single screw extruder illustrated by polyethylene as an example , Polimery: Vol. 49 No. 3 (2004)
J. Ryszkowska, E. Zawadzak, D. Hreniak, W. Stręk, K. J. Kurzydłowski, Structure and properties of polyurethane/YAG:Tb3+ nanocomposites with luminescence properties , Polimery: Vol. 52 No. 5 (2007)
J. Pigłowski, A. Kiersnowski, J. Dołęga, Preparation, structure and useful properties of poly(e-caprolactone)/layered silicates nanocomposites , Polimery: Vol. 51 No. 10 (2006)
Nur'Aishah Ahmad Shahrim, Nur Nadia Mohd Hafiz, Zuraida Ahmad, Yose Fachmi Buys, Norshahida Sarifuddin, Ink based on poly(3,4-ethylene dioxythiophene), poly(sulfonostyrene) and silver nanoparticles (PEDOT/PSS/SNP) blends for fabrics printing , Polimery: Vol. 67 No. 6 (2022)
G. Lewandowski, E. Rytwińska, E. Milchert, Physical properties and application of polyamide 12 , Polimery: Vol. 51 No. 11-12 (2006)
E. Schab-Balcerzak, M.-A. Kakimoto, Curing of epoxy resin with hyperbranched polyamide , Polimery: Vol. 50 No. 4 (2005)
T. Garbacz, Effect of selected auxiliary agents on the properties of surface layer of extruded polyethylene , Polimery: Vol. 49 No. 1 (2004)
Sara Sarraj, Małgorzata Szymiczek, Organosilicon polymer for the release of antimicrobial drugs , Polimery: Vol. 67 No. 4 (2022)
R. Bogucka, I. Kosińska, P. H. Brunner, Setting priorities in plastic waste management - lessons learned from material flow analysis in Austria and Poland , Polimery: Vol. 53 No. 1 (2008)
R. Jeziórska, Effect of ricinol-2-oxazoline methylmaleate on the structure and properties of polyamide 6 and low density polyethylene blends , Polimery: Vol. 49 No. 9 (2004)

<< < 20 21 22 23 24 25 26 27 28 29 > >>

You may also start an advanced similarity search for this article.

Details

References

Statistics

Authors

Download files

PDF

Zasady cytowania

Maridass, B., & Gupta, B. R. (2022). Effect of extruder parameters on mechanical properties of revulcanized ground rubber tire powder. Polimery, 52(6), 456–460. Retrieved from https://polimery.ichp.vot.pl/index.php/p/article/view/1439

Altmetric indicators

Citing articles via

Statistics

Total abstract views : 0

PDF Downloads : 0