Effect of extruder parameters on mechanical properties of revulcanized ground rubber tire powder

B. Maridass; B. R. Gupta

Published : 2022-08-26

Vol. 52 No. 6 (2007)

Effect of extruder parameters on mechanical properties of revulcanized ground rubber tire powder

B. Maridass B. R. Gupta

Abstract

Response Surface Methodology (RSM) was used to study the effects of processing parameters viz. barrel temperature and screw speed on the mechanical properties of revulcanized waste ground rubber tire powder from a counter rotating twin screw extruder. Central composite rotatable design (CCRD) for two variables at five levels was chosen as the experimental design. The following parameters were analyzed: rheometric maximum torque, tensile strength, elongation at break, stress at 100% elongation, hardness and tear strength. The results obtained after measuring the responses were fitted as two variable second order equations which were confirmed experimentally. Barrel temperature is found to be the more influencing factor than the screw speed. Optimum properties were predicted at temperature 197°C and screw speed 25rpm.

Keywords

wytłaczarka dwuślimakowa ; plan eksperymentu ; metodologia analizy powierzchni odpowiedzi ; rewulkanizacja ; odpady z opon gumowych ; właściwości mechaniczne twin screw extruder ; design of experiments ; response surface methodology ; revulcanization ; waste ground rubber tire ; mechanical properties

Similar Articles

I. Zarzyka, Preparation and properties of polyurethane foams obtained with hydroxyethyl derivatives of oxamide modified with boric acid , Polimery: Vol. 58 No. 3 (2013)
A. Iwan, L. Moroń, Study on electrical conductivity of polyazomethines with liquid crystalline properties , Polimery: Vol. 58 No. 1 (2013)
Maksymilian Burzynski, , , , , , , , Comparison study of the influence of carbon and halloysite nanotubes on the preparation and rheological behavior of linear low density polyethylene , Polimery: Vol. 65 No. 2 (2020)
Mateusz Barczewski, Kinga Biedrzycka, Olga Mysiukiewicz, Danuta Matykiewicz, Jacek Andrzejewski, Arkadiusz Kloziński, Marek Szostak, Milled basalt fibers as reinforcement for polyurea composite spray coatings with improved thermomechanical stability and mechanical performance , Polimery: Vol. 65 No. 3 (2020)
K. Sowa-Kasprzak, J. Żwawiak, L. Zaprutko, Organogels as modern drug carriers , Polimery: Vol. 63 No. 3 (2018)
I. Steinborn-Rogulska, G. Rokicki, Solid-state polycondensation (SSP) as a method to obtain high molecular weight polymers. Part I. Parameters influencing the SSP process , Polimery: Vol. 58 No. 1 (2013)
T. Garbacz, Properties of triple-layered pvc coatings synthesized in the micropore coextrusion method , Polimery: Vol. 56 No. 2 (2011)
J. Konieczkowska, A. Kozanecka-Szmigiel, W. Piecek, R. Węgłowski, E. Schab-Balcerzak, Azopolyimides – influence of chemical structure on azochromophore photo-orientation efficiency , Polimery: Vol. 63 No. 7-8 (2018)
K. Jaszcz, J. Łukaszczyk, M. Śmiga-Matuszowicz, New biodegradable biomedical polymers based on succinic acid , Polimery: Vol. 58 No. 9 (2013)
N. Tudorachi, A. P. Chiriac, Biodegradable copolymers with succinimide and lactic acid units. Part II. Kinetics of thermodegradation, thermal characteristics and zeta potential of the product , Polimery: Vol. 56 No. 4 (2011)

<< < 92 93 94 95 96 97 98 99 100 101 > >>

You may also start an advanced similarity search for this article.

Details

References

Statistics

Authors

Download files

PDF

Zasady cytowania

Maridass, B., & Gupta, B. R. (2022). Effect of extruder parameters on mechanical properties of revulcanized ground rubber tire powder. Polimery, 52(6), 456–460. Retrieved from https://polimery.ichp.vot.pl/index.php/p/article/view/1439

Altmetric indicators

Citing articles via

Statistics

Total abstract views : 0

PDF Downloads : 0