The universal temperature parameter of rigid PVC gelation in Brabender kneader

K. Piszczek; J. Tomaszewska; T. Sterzyński

Published : 2022-09-01

Vol. 49 No. 9 (2004)

The universal temperature parameter of rigid PVC gelation in Brabender kneader

K. Piszczek J. Tomaszewska T. Sterzyński

Abstract

Course of gelation of rigid PVC Polanvil S of K-value 52, 58, 61, 67 or 70, in the chamber of Brabender kneader at temperature range 160- 185 °C and rotation speed of the rotors 10-50 min(-1), has been investigated. On the basis of torque and temperature changes as functions of process time the curves of torque changes versus real temperature of gelating blend were received. It has been observed that maximal torque value always occurred in the narrow temperature range, independently on chamber wall temperature or shear rate, and was dependent on PVC K-value. It was found that temperature related to torque maximum (T(EG)) could be universal parameter characterizing PVC gelation. The proposed new way of analysis facilitates more precise comparison of torque curves obtained at various set temperature and rotational speeds of rotors.

Keywords

poli(chlorek winylu) ; liczba K ; żelowanie ; plastogram ; temperatura maksimum momentu obrotowego ; parametr uniwersalny poly(vinyl chloride) ; K-value ; gelation ; torque curve ; torque maximum temperature ; universal parameter

Details

References

Statistics

Authors

Download files

PDF

Zasady cytowania

Piszczek, K., Tomaszewska, J., & Sterzyński, T. (2022). The universal temperature parameter of rigid PVC gelation in Brabender kneader. Polimery, 49(9), 646–648. Retrieved from https://polimery.ichp.vot.pl/index.php/p/article/view/1796

References

Bortel K, Szewczyk P.: Polimery 1993, 41, 575.

2. Covas J. A., Gilbert M., Marshall D. E.: PIast. Rubber. Proces. Appl. 1988,8,107.

3. Piszczek K, Zajchowski S., Skraga J.: Zeszyty Naukowe ATR Bydgoszcz 1986, nr 8,129.

4. Piszczek K, Skraga J., Zajchowski S.: Polimery 1981, 26,170.

5. Bambrick C. R., Hoegy L. R., Ferrari L. P.: J. Vinyl Technol. 1994,16,62.

6. Piszczek K, Sterzyński T., Łu~aszewicz E.: Polym. Test. 2003, 22, 11.

7. Pedersen T. c. J. Vinyl Technol. 1992,14,54.

8. Bortel K, Szewczyk P.: Polimery 1996, 44, 643.

9. Allsopp M. W.: in "Manufacture and Processing of PVC" (Ed. Burgess R. M.), Chapt 8., Applied Science, London 1982.

10. Tomaszewska J., Sterzyński T., Piszczek K: J. Appl. Polym. Sci. (will be published).

11. Chen C. H., Mao C. E, Lo Y. W: J. Appl. Polym. Sci. 2001, 81, 3022.

12. Zajchowski S., Piszczek K, Tomaszewska J.: Polimery 2001,46,236.

13. Piszczek K, Tomaszewska J.: Chemik 2003, nr 1, 12.

14. Gilbert M.: J. M. S.-Rev. Macromol. Chem. Phys. 1994, C34,77.

15. Schramm G.: "A practical approach to rheology and rheometry" (Polish Ed.), Poznań 1994, 215.

Google Scholar

Citing articles via

Statistics

Total abstract views : 0

PDF Downloads : 0

K. Piszczek Kazimierz.Piszczek@atr.bydgoszcz.pl

Affiliation
University of Technology and Agriculture Faculty of Chemical Technology and Engineering, Department of Polymer Technology, ul. Seminaryjna 3, 85-326 Bydgoszcz

J. Tomaszewska

Affiliation
University of Technology and Agriculture Faculty of Chemical Technology and Engineering, Department of Polymer Technology, ul. Seminaryjna 3, 85-326 Bydgoszcz

T. Sterzyński

Affiliation
University of Technology and Agriculture Faculty of Chemical Technology and Engineering, Department of Polymer Technology, ul. Seminaryjna 3, 85-326 Bydgoszcz