Kompozycje polimerowe na podstawie butoksylowanej żywicy melaminowo-formaldehydowej modyfikowanej prepolimerami uretanowymi z końcowymi grupami izocyjanianowymi

A. Żmihorska-Gotfryd

Published : 2022-09-17

Vol. 48 No. 4 (2003)

Polymer compositions based on butoxylated melamine-formaldehyde resin modified with urethane prepolymers with isocyanate end-groups

A. Żmihorska-Gotfryd

Abstract

Butoxylated melamine-formaldehyde resins (BMF) and two grades of urethane oligomers with isocyanate end-groups (PUR-izo) based on toluilene diisocyanate and oligooxypropylenediol or oligooxyalkylenetriol have been obtained. Physicochemical properties of these products were ermined (Tables 1, 2) and basing on the IR and H-1 NMR spectra their chemical structures were determined (Figs 1-6). Varnish coatings have been prepared from BMF and PUR-izo, differing with the type and the content (3-10 weight %) of the oligourethane modifiers. The effects of these two factors on the functional properties of coatings have been determined. It has been stated that the coatings showed very good adhesion to the substrate, high impact strength and their elasticity and hardness were much better than of unmodified BMF resin (Table 3). There was also found the cured BMF-PUR-izo compositions showed good thermal stability (Table 4) and excellent chemical resistance.

Keywords

butoksylowana żywica melaminowo-formaldehydowa ; prepolimery uretanowe z grupami izocyjanianowymi ; modyfikacja chemiczna ; powłoki lakiernicze ; właściwości mechaniczne ; właściwości cieplne ; odporność chemiczna butoxylated melamine-formaldehyde resin ; urethane prepolymers with isocyanate groups ; chemical modification ; varnish coatings ; mechanical properties ; thermal properties ; chemical resistance

Similar Articles

Paweł Stabla, Michał Smolnicki, Szymon Duda, Paweł Zielonka, Karolina Paczkowska, Zuzanna Pacholec, Michał Barcikowski, Wojciech Błażejewski, Influence of mosaic patterns in filament-wound tubes on mechanical behaviour under axial compression loading , Polimery: Vol. 69 No. 11-12 (2024)
M.D. Hazrol, S.M. Sapuan, R.A. Ilyas, E.S. Zainudin, M.Y.M. Zuhri, N.I. Abdul Wahab, Morphology and selected properties of kenaf fiber/cornhusk reinforced corn starch hybrid biocomposites , Polimery: Vol. 67 No. 11-12 (2022)
Hilal Turkoglu Sasmazel, Marwa Alazzawi, Verra Sadhu, Melike Gozutok, Biocompatibility of electrospun PVA-based nanocomposite with chemical vapor deposition-derived graphene monolayer , Polimery: Vol. 69 No. 11-12 (2024)
R. Szweda, D. Lipowska, J. Silberring, A. Dworak, B. Trzebicka, Polymers for peptide/protein arrays , Polimery: Vol. 60 No. 2 (2015)
E. Wierzbicka, I. Legocka, E. Wardzińska-Jarmulska, B. Szczepaniak, M. Krzyżewski, Functionalized nanofiller for polymers – preparation, properties and application , Polimery: Vol. 61 No. 10 (2016)
R. Jeziórska, Z. Wielgosz, A. Szadkowska, M. Studziński, R. Komornicki, J. Stasiński, A. Kania-Szarek, Structure, thermal characterization and mechanical properties of poly(phenylene oxide) and high impact polystyrene blend , Polimery: Vol. 61 No. 10 (2016)
P. Rytlewski, M. Stepczyńska, K. Moraczewski, R. Malinowski, B. Jagodziński, M. Żenkiewicz, Mechanical properties and biodegradability of flax fiber-reinforced composite of polylactide and polycaprolactone , Polimery: Vol. 63 No. 9 (2018)
M.Y.M. Zuhri, M.A. Nasrudin, M.A.M. Nasrodin, S.M. Sapuan, M.Z. Hassan, Mechanical properties under quasi-static loading of the core made of flax/poly(lactic acid) composite , Polimery: Vol. 66 No. 3 (2021)
P. Tumiłowicz, L. Synoradzki, A. Sobiecka, J. Arct, K. Pytkowska, S. Safarzyński, Bioactivity of Baltic amber – fossil resin , Polimery: Vol. 61 No. 5 (2016)
M. Kurańska, A. Prociak, S. Michałowski, A. Zawadzińska, The influence of blowing agents type on foaming process and properties of rigid polyurethane foams , Polimery: Vol. 63 No. 10 (2018)

<< < 21 22 23 24 25 26 27 28 29 30 > >>

You may also start an advanced similarity search for this article.

Details

Statistics

Authors

Download files

PDF (Język Polski)

Zasady cytowania

Żmihorska-Gotfryd, A. (2022). Polymer compositions based on butoxylated melamine-formaldehyde resin modified with urethane prepolymers with isocyanate end-groups. Polimery, 48(4), 280–287. Retrieved from https://polimery.ichp.vot.pl/index.php/p/article/view/1864

Citing articles via

Statistics

Total abstract views : 0

PDF Downloads : 0