Rheological and thermal properties of mixtures of hydroxyl-terminated polybutadiene and plasticizer

T. Gołofit; K. Gańczyk-Specjalska; K. Jamroga; Ł. Kufel

doi:10.14314/polimery.2018.1.9

Published : 2021-01-13

Vol. 63 No. 1 (2018)

Rheological and thermal properties of mixtures of hydroxyl-terminated polybutadiene and plasticizer

T. Gołofit K. Gańczyk-Specjalska K. Jamroga Ł. Kufel

DOI: https://doi.org/10.14314/polimery.2018.1.9

Abstract

Mixtures of hydroxyl-terminated polybutadiene (HTPB) and dioctyladipate (DOA) as a plasticizer, which after crosslinking are applied as binders in heterogeneous propellants, were studied.The influence of mixture composition on rheological and thermal properties, important from technological and utility viewpoint were specified. The temperature dependence of prepared mixtures viscosity were studied. Systems were subjected to crosslinking and values of pot life (tpl) were determined. It was stated that tpl rose with increasing plasticizer content. Differential scanning calorimetry and thermogravimetry techniques were used toanalyze thermal stability of mixtures. It was concluded that applied component scould not decompose in the temperature range of 290–350 K and studied mixtures did not cause the hazard of thermal explosion.

Keywords

rheology ; thermal stability ; hydroxyl-terminated polybutadiene curing reologia ; stabilność termiczna ; polibutadien z końcowymi grupami hydroksylowymi ; sieciowanie

Details

References

Statistics

Authors

Download files

PDF

Zasady cytowania

Gołofit, T., Gańczyk-Specjalska, K., Jamroga, K., & Kufel, Ł. (2021). Rheological and thermal properties of mixtures of hydroxyl-terminated polybutadiene and plasticizer. Polimery, 63(1), 53–56. https://doi.org/10.14314/polimery.2018.1.9

References

Saravanakumar D., Sengottuvelan N., Narayanan V. et al.: Journal of Applied Polymer Science 2001, 119, 2517. http://dx.doi.org/10.1002/app.32859

[2] Czub P., Kasza P.: Polimery 2014, 59, 466. http://dx.doi.org/10.14314/polimery.2014.466

[3] Kozakiewicz J., Rokicki G., Przybylski J. et al.: Polimery 2011, 56, 564.

[4] Chai T., Liu Y.C., Ma H. et al.: “Rheokinetic analysis on the curing process of HTPB-DOA-MDI binder system”, IOP Conference Series: Materials Science and Engineering, IOP Publishing, Hangzhau, China, 20–23 May 2016, p. 1.

[5] Chaturvedi S., Dave P.N.: Arabian Journal of Chemistry 2015. http://dx.doi.org/10.1016/j.arabjc.2014.12.033

[6] Cao Z., Zhou Q., Jie S. et al.: Industrial & Engineering Chemistry Research 2016, 55, 1582. http://dx.doi.org/10.1021/acs.iecr.5b04921

[7] Yang L., Xie K., Pei J. et al.: Journal of Applied Polymer Science 2016, 133, 43 512. https://dx.doi.org/10.1002/app.43512

[8] Tanver A., Rehman F., Wazir A. et al.: RSC Advances 2016, 6, 11 032. http://dx.doi.org/10.1039/C5RA23250C

[9] Kumari D., Balakshe R., Banerjee S. et al.: Review Journal of Chemistry 2012, 2, 240. http://dx.doi.org/10.1134/S207997801203003X

[10] Florczak B., Bednarczyk E., Maranda A.: Chemik 2015, 69, 136.

[11] Florczak B., Bogusz R., Skupiński W. et al.: Central European Journal of Energetic Materials 2015, 12, 841.

[12] Singh M., Kanungo B.K., Bansal T.K.: Journal of Applied Polymer Science 2002, 85, 842. http://dx.doi.org/10.1002/app.10719

[13] Saeb M.R., Rastin H., Nonahal M. et al.: Journal of Applied Polymer Science 2017, 134, 45 221. http://dx.doi.org/10.1002/app.45221

[14] Sekkar V., Alex A.S., Kumar V. et al.: Journal of Macromolecular Science, Part A 2017, 54, 171. http://dx.doi.org/10.1080/10601325.2017.1265403

[15] Bandgar B.M., Sharma K.C., Mukundan T. et al.: Journal of Applied Polymer Science 2003, 89, 1331. http://dx.doi.org/10.1002/app.12254

[16] Sekkar V., Raunija T.S.K.: Propellants, Explosives, Pyrotechnics 2015, 40, 267. http://dx.doi.org/10.1002/prep.201400054

[17] Xu Z.-X., Wang Q., Fu X.-Q.: Journal of Hazardous Materials 2015, 300, 702. http://dx.doi.org/10.1016/j.jhazmat.2015.07.069

[18] Gańczyk K., Zygmunt A., Gołofit T.: Journal of Thermal Analysis and Calorimetry 2016, 125, 967. http://dx.doi.org/10.1007/s10973-016-5476-9

[19] Gołofit T., Zyśk K.: Journal of Thermal Analysis and Calorimetry 2015, 119, 1931. http://dx.doi.org/10.1007/s10973-015-4418-2

[20] Gołofit T., Książczak A.: Problemy Mechatroniki: Uzbrojenie, Lotnictwo, Inżynieria Bezpieczeństwa 2011, 2, 31.

[21] Semenov N.N.: “Chemical Kinetics and Chain Reactions”, Oxford University Press, London 1935, p. 489.

[22] Cepeda E., Hermosa M., Llorens F. et al.: International Journal of Food Science and Technology 2002, 37, 271. http://doi.org/10.1046/j.1365-2621.2002.00566.x

Google Scholar

Altmetric indicators

Citing articles via

Statistics

Total abstract views : 0

PDF Downloads : 0

T. Gołofit help@libcom.pl

Affiliation
Warsaw University of Technology, Department of High-Energetic Materials, Noakowskiego 3, 00-664, Warsaw, Poland. Institute of Industrial Organic Chemistry, Annopol 6, 03-236 Warsaw, Poland

K. Gańczyk-Specjalska

Affiliation
Institute of Industrial Organic Chemistry, Annopol 6, 03-236 Warsaw, Poland

K. Jamroga

Affiliation
Warsaw University of Technology, Department of High-Energetic Materials, Noakowskiego 3, 00-664, Warsaw, Poland. Institute of Industrial Organic Chemistry, Annopol 6, 03-236 Warsaw, Poland

Ł. Kufel

Affiliation
Warsaw University of Technology, Department of High-Energetic Materials, Noakowskiego 3, 00-664, Warsaw, Poland. Institute of Industrial Organic Chemistry, Annopol 6, 03-236 Warsaw, Poland