Heterofazowe termoplastyczne kompozycje polimerowe modyfikowane odpadami gumowymi

E. Kowalska; M. Żubrowska; M. Borensztejn

Published : 2022-09-17

Vol. 48 No. 9 (2003)

Heterophase thermoplastic polymer compositions modified with rubber wastes

E. Kowalska M. Żubrowska M. Borensztejn

Abstract

The results of own research concerning new polymeric compositions based fully on secondary materials, obtained by physical modification, were presented. Recycled thermoplastics - PE-LD or PVC (Table 1) - were used as polymer matrix. Ground vulcanized rubber wastes of tires as well as thermally modified phosphogypsum (Table 2 and 3) or activated chalk were used as the fillers. Mechanical properties of such compositions (Table 4 and 5) and possibilities of their practical applications, with utilization of specific properties coming from the materials used, were discussed. It has been found that porous hoses made of such cornpositions show the properties qualifying them for use in the irrigation systems (Fig. 6). The compositions discussed can be also used as the fillers of noise damping screens (Fig. 7), fillers of columns for biological waste-water purification (Fig. 8) as well as for producing of the traffic safety devices or floorings.

Keywords

odpadowy polietylen ; polichlorek winylu ; napełniane kompozycje termoplastyczne ; odpady gumowe ; fosfogips ; właściwości użytkowe ; możliwości zastosowania PE wastes ; PVC wastes ; filled thermoplastic compositions ; rubber wastes ; phosphogypsum ; useful properties ; application possibility

Similar Articles

K. Formela, M Cysewska, J. Haponiuk, The influence of materials dosing order and shear forces on the properties of high density polyethylene/ground tire rubber blends obtained in co-rotating twin screw extruder , Polimery: Vol. 59 No. 4 (2014)
P. Czub, W. Mazela, J. Pielichowski, Epoxy-carbazole compositions. Part I. Compositions with 9-(2, 3-epoxypropyl) carbazole , Polimery: Vol. 48 No. 9 (2003)
D. Sobków, K. Czaja, Influence of accelerated ageing conditions on the process of polyolefines degradation , Polimery: Vol. 48 No. 9 (2003)
G. Lewandowski, E. Rytwińska, E. Milchert, Physical properties and application of polyamide 12 , Polimery: Vol. 51 No. 11-12 (2006)
A. Żmihorska-Gotfryd, Polymer compositions based on butoxylated melamine-formaldehyde resin modified with urethane prepolymers with isocyanate end-groups , Polimery: Vol. 48 No. 4 (2003)
E. Kowalska, Z. Wielgosz, M. Żubrowska, S. Pasynkiewicz, M. Choroś, Application of waste phosphogypsum in thermoplastic and chemosetting composites , Polimery: Vol. 49 No. 11-12 (2004)
Rafał Oliwa, Epoxy resin compositions containing liquid phosphorus flame retardants used in infusion technology , Polimery: Vol. 65 No. 7-8 (2020)
O. I. Dimitry, W. M. Sayed, A. M. Mazroua, A. L. Saad, Poly(vinyl chloride)/nanoclay nanocomposites - electrical and mechanical properties , Polimery: Vol. 54 No. 1 (2009)
J. Pigłowski, A. Kiersnowski, J. Dołęga, Preparation, structure and useful properties of poly(e-caprolactone)/layered silicates nanocomposites , Polimery: Vol. 51 No. 10 (2006)
B. Likozar, M. Krajnc, Modeling of the dynamic mechanical properties of the coagent reinforced row hydrogenated poly(butadiene-co-acrylonitrile) (HNBR) and the morphology of coagent nanodispersions in HNBR matrix , Polimery: Vol. 54 No. 6 (2009)

1 2 3 4 5 6 7 8 9 10 > >>

You may also start an advanced similarity search for this article.

Details

Statistics

Authors

Download files

PDF (Język Polski)

Zasady cytowania

Kowalska, E., Żubrowska, M., & Borensztejn, M. (2022). Heterophase thermoplastic polymer compositions modified with rubber wastes. Polimery, 48(9), 633–640. Retrieved from https://polimery.ichp.vot.pl/index.php/p/article/view/1908

Citing articles via

Statistics

Total abstract views : 0

PDF Downloads : 0

E. Kowalska polimery@ichp.pl

Affiliation
Instytut Chemii Przemysłowej im. Prof. Ignacego Mościckiego, ul. Rydygiera 8, 01-793 Warszwawa, Poland

M. Żubrowska

M. Borensztejn