Heterofazowe termoplastyczne kompozycje polimerowe modyfikowane odpadami gumowymi

E. Kowalska; M. Żubrowska; M. Borensztejn

Published : 2022-09-17

Vol. 48 No. 9 (2003)

Heterophase thermoplastic polymer compositions modified with rubber wastes

E. Kowalska M. Żubrowska M. Borensztejn

Abstract

The results of own research concerning new polymeric compositions based fully on secondary materials, obtained by physical modification, were presented. Recycled thermoplastics - PE-LD or PVC (Table 1) - were used as polymer matrix. Ground vulcanized rubber wastes of tires as well as thermally modified phosphogypsum (Table 2 and 3) or activated chalk were used as the fillers. Mechanical properties of such compositions (Table 4 and 5) and possibilities of their practical applications, with utilization of specific properties coming from the materials used, were discussed. It has been found that porous hoses made of such cornpositions show the properties qualifying them for use in the irrigation systems (Fig. 6). The compositions discussed can be also used as the fillers of noise damping screens (Fig. 7), fillers of columns for biological waste-water purification (Fig. 8) as well as for producing of the traffic safety devices or floorings.

Keywords

odpadowy polietylen ; polichlorek winylu ; napełniane kompozycje termoplastyczne ; odpady gumowe ; fosfogips ; właściwości użytkowe ; możliwości zastosowania PE wastes ; PVC wastes ; filled thermoplastic compositions ; rubber wastes ; phosphogypsum ; useful properties ; application possibility

Similar Articles

K. Wilpiszewska, T. Spychaj, Chemical modification of starch by reactive extrusion , Polimery: Vol. 53 No. 4 (2008)
Małgorzata Oleksy, Klaudia Dynarowicz, David Aebisher, Polymer composites for obtaining human anatomic structures , Polimery: Vol. 68 No. 6 (2023)
Katarzyna Pojnar, Barbara Pilch-Pitera, Maciej Kisiel, Aleksandra Zioło, Michał Kędzierski, UV-curable powder transparent coatings based on oligo(meth)acrylic resins , Polimery: Vol. 69 No. 1 (2024)
S. Borysiak, B. Doczekalska, The influence of chemical modification of wood on its nucleation ability in polypropylene composites , Polimery: Vol. 54 No. 11-12 (2009)
A. Bieniek, B. Lipp-Symonowicz, S. Sztajnowski, Influence of the structures of polyamide 6 fibers on their ageing under intensive insolation conditions , Polimery: Vol. 54 No. 11-12 (2009)
Agnieszka Kowalczyk, Agata Kraśkiewicz, Mateusz Weisbrodt, Krzysztof Kowalczyk, Hydrogels based on poly(2-hydroxyethyl methacrylate) and nettle extract , Polimery: Vol. 68 No. 9 (2023)
M. Żenkiewicz, Corona discharge in an air as a method of modification of polymeric materials' surface layers , Polimery: Vol. 53 No. 1 (2008)
Joanna Kowalik, Magdalena Tworek, Michał Smaruj, Influence of aluminum alloys surface treatment on the durability of glued joints , Polimery: Vol. 68 No. 10 (2023)
Ghasem Rezanejade Bardajee, Maede Noruzian, Khadijeh Didehban, Synthesis of double network nanohydrogel and its performance in release of doxorubicin , Polimery: Vol. 69 No. 5 (2024)
Tomasz M. Majka, The influence of amino chain length and calcium lignosulfonate modification on lignosulfonamides flammability and thermal stability , Polimery: Vol. 68 No. 10 (2023)

<< < 90 91 92 93 94 95 96 97 98 99 > >>

You may also start an advanced similarity search for this article.

Details

Statistics

Authors

Download files

PDF (Język Polski)

Zasady cytowania

Kowalska, E., Żubrowska, M., & Borensztejn, M. (2022). Heterophase thermoplastic polymer compositions modified with rubber wastes. Polimery, 48(9), 633–640. Retrieved from https://polimery.ichp.vot.pl/index.php/p/article/view/1908

Citing articles via

Statistics

Total abstract views : 0

PDF Downloads : 0

E. Kowalska polimery@ichp.pl

Affiliation
Instytut Chemii Przemysłowej im. Prof. Ignacego Mościckiego, ul. Rydygiera 8, 01-793 Warszwawa, Poland

M. Żubrowska

M. Borensztejn