Zagospodarowanie odpadów sztywnych pianek poliuratenowo-poliizocyjanuranowych w wyniku ich alkoholizy połączonej z aminolizą

B. Czupryński; J. Paciorek-Sadowska; J. Liszkowska; J. Czupryńska

Published : 2022-09-18

Vol. 47 No. 2 (2002)

The utilization of rigid polyurethane-polyisocyanurate foams by the combined alcoholysis-aminolysis process

B. Czupryński J. Paciorek-Sadowska J. Liszkowska J. Czupryńska

Abstract

Rigid PUR-PIR foams prepared (i) with addition or (ii) with no addition of a solid fraction of rye slops or potato slops were both alcoholyzed and aminolyzed. The alcoholyzate was used to replace the original polyether polyol, 0.05-0.20 of chemical equivalent, which is used to prepare foams (Table 2). Three series of foams were prepared, varying in the amount of the alcoholyzate added. Apparent density, compression strength, brittleness, oxygen index, combustion residue, stability of linear dimensions, volume change (in 48 h at 120degreesC), and softening point (Table 3, Figs. 2-4) were determined. As the proportion of the alcoholyzate was raised from 0.05 to 0.2 chemical equivalent, the compression strength of the mode (ii) foams (foams 1.1-1.4) rose, whereas brittleness, oxygen index and softening point remained practically unaffected as compared with control foam (foam 1.0 with no alcoholyzate added). In the mode (i) foams (solid fraction of rye slops added) prepared with the alcoholyzate added (foams 2.1-2.4), the compression strength rose but slightly (from 208.7 kPa in control foam to 229.0 kPa in foam containing 0.2 chem. equiv. of alcoholyzate) and the brittleness and softening point fell. The foams containing the alcoholyzate and the solid fraction of potato slops (foams 3.1-3.4) exhibited not only lower brittleness and reduced softening points but also lower compression strengths. In each foam examined, the oxygen index and combustion residue remained practically unaffected as compared with controls. IR spectra confirmed the presence of the urethane and isocyanurate groups in the foams prepared.

Keywords

sztywne pianki poliuretanowo-poliizocyjanuranowe ; recykling ; alkoholiza z aminolizą ; utylizacja wywaru żytniego i ziemniaczanego ; fizyczne właściwości pianek ; mechaniczne właściwości pianek rigid polyurethane-polyisocyanurate foams ; recycling ; alcoholysis and aminolysis ; utilization of rye slops and potato

Similar Articles

Ewa Miękoś, Bronisław Samujło, Marek Zieliński, Dariusz Sroczyński, Polymerization of aniline in an environment of a constant magnetic field , Polimery: Vol. 66 No. 7-8 (2021)
T. Spychaj, M. Zdanowicz, J. Kujawa, B. Schmidt, Carboxymethyl starch with high degree of substitution: synthesis, properties and application , Polimery: Vol. 58 No. 7-8 (2013)
S Paszkiewicz, A Szymczyk, Z Špitalský, J Mosnáček, E Janus, Z Rosłaniec, Effect of addition of expanded graphite (EG) on the synthesis and characteristics of poly(ethylene terephthalate) modified with cyclohexanedimethanol (PETG) , Polimery: Vol. 58 No. 11-12 (2013)
Nur Athirah Abdullah, Muhammad Hanif Sainorudin, Mohd Saiful Asmal Rani, Masita Mohammad, Nurul Huda Abd Kadir, Nilofar Asim, Structure and thermal properties of microcrystalline cellulose extracted from coconut husk fiber , Polimery: Vol. 66 No. 3 (2021)
M. Zielecka, R. Jeziórska, E. Bujnowska, B. Kępska, M. Wenda, Silica nanofillers with immobilized silver or copper nanoparticles synthesized by sol-gel method , Polimery: Vol. 57 No. 3 (2012)
B. Mossety-Leszczak, Liquid-crystalline epoxy resins as matrices for composites and nanocomposites , Polimery: Vol. 57 No. 3 (2012)
M. Oleksy, Composites of commercial unsaturated polyester resins containing NanobentŽ nanofillers. Part I. Preparation and properties of polymer nanocomposites containing domestic nanofillers , Polimery: Vol. 57 No. 3 (2012)
A. Szymczyk, Z. Roslaniec, Non-isothermal crystallization of poly(trimethylene terephthalate)/single-walled carbon nanotubes nanocomposites , Polimery: Vol. 57 No. 3 (2012)
T. Porębski, S. Tomzik, W. Ratajczak, M. Talma-Piwowar, W. Capała, Application of membrane processes in chemical industry — feedstock recycling, energy saving , Polimery: Vol. 57 No. 5 (2012)
A. Dworak, B. Trzebicka, A. Kowalczuk, A. Utrata-Wesołek, W. Wałach, M. Libera, J. Kronek, Thermosensitive star polymers — synthesis and properties , Polimery: Vol. 57 No. 6 (2012)

<< < 104 105 106 107 108 109 110 111 112 113 > >>

You may also start an advanced similarity search for this article.

Details

Statistics

Authors

Download files

PDF (Język Polski)

Zasady cytowania

Czupryński, B., Paciorek-Sadowska, J., Liszkowska, J., & Czupryńska, J. (2022). The utilization of rigid polyurethane-polyisocyanurate foams by the combined alcoholysis-aminolysis process. Polimery, 47(2), 104–109. Retrieved from https://polimery.ichp.vot.pl/index.php/p/article/view/1950

Citing articles via

Statistics

Total abstract views : 0

PDF Downloads : 0

B. Czupryński polimery@ichp.pl

Affiliation
Akademia Bydgoska Kazimierza Wielkiego, Instytut Techniki, Chodkiewicza 30, 85065 Bydgoszcz, Poland

J. Paciorek-Sadowska

J. Liszkowska

J. Czupryńska