Właściwości karboksylowanego kauczuku butadienowo-akrylonitrylowego zawierającego "in situ" zsyntetyzowane napełniacze krzemionkowe

M. Zaborski; J. Pietrasik

Published : 2022-09-18

Vol. 47 No. 9 (2002)

Properties of carboxylated acrylonitrile/butadiene rubber containing "in situ" synthesized silica fillers

M. Zaborski J. Pietrasik

Abstract

From silica precursors we synthesized silica fillers in sol-gel reaction in the carboxylated acrylonitrile/butadiene rubber (XNBR). N-2-aminoethyl-3-aminopropyl-trimethoxysilane (DAMS) and tetraethoxysilane (TEOS) were used as fillers' precursors. It has been found that DAMS is a substance crosslinking XNBR. The network points are silsesquioxanes' domains containing amide as well as ionic bonds. Some part of points (similar to30%) decompose under ethylenediamine treatment. The bigger DAMS content the bigger crosslinking density of elastomer as ell as the stress at suitable elongation and tensile strength Tables 2 and 4). The dynamic properties measurements show that rganosilica compounds do not influence glass transitiontemperature of elastomer (Table 6) but in the range of 30-40degreesC the second maximum appears which is a transition connected to ionic aggregates activity. Addition of a mixture of DAMS + TEOS to the elastomer causes the increase of crosslinking of silsesquioxanes' domains and the filler shows tendency to creation of its own structure (Fig. 2). Si-29 NMR results show that mostly trifunctional structures Q(3) are obtained for equal ratio of silanes (1:1) but tetrafunctional structures Q(4) are also present (Table 1). The increasing of tetrafunctional structure Q(4) content, that is a synthesis of a filler with DAMS + TEOS mixture, leads to the increase of stress at suitable elongation, and tensile strength (Table 5).

Keywords

synteza in situ ; N-2-aminoetylo-3-aminopropylotrimetoksysilan ; tetraetoksysilan ; karboksylowany kauczuk butadienowo-akrylonitrylowy ; sieciowanie ; właściwości wulkanizatów silica filler "in situ" synthesis ; N-2-aminoethyl-3-aminopropyltrimethoxysilane ; tetraethoxysilane ; carboxylated acrylonitrile-butadiene rubber ; crosslinking ; vulcanizates properties

Similar Articles

M. Auguścik, M. Kurańska, A. Prociak, W. Karalus, K. Lipert, J. Ryszkowska, Production and characterization of poly(urea-urethane) elastomers synthetized from rapeseed oil-based polyols. Part I. Structure and properties , Polimery: Vol. 61 No. 7-8 (2016)
K. Bociong, M. Krasowski, M. Domarecka, J. Sokołowski, Effect of the method of photopolymerization of dental composites based on dimethacrylate resin on the shrinkage stresses and selected properties of the cured material , Polimery: Vol. 61 No. 7-8 (2016)
Y.-H. Cai, Y.-H. Zhang, L.-S. Zhao, Effect of modified calcium carbonate on the thermal and mechanical properties of biodegradable poly(L-lactic acid) , Polimery: Vol. 60 No. 2 (2015)
Preethi Ravikumar, Suresh Sagadevan, Influence of the addition of chitin nanocrystals on the characteristics of cellulose acetate films , Polimery: Vol. 66 No. 2 (2021)
Szymon Kugler, Paula Ossowicz-Rupniewska, Ewa Wierzbicka, Jakub Łopiński, Protective paints from natural resources: composition and properties , Polimery: Vol. 66 No. 7-8 (2021)
Z. Tartakowski, Electrostatic properties of modified recyclates of polyvinyl chloride cable insulation , Polimery: Vol. 55 No. 6 (2010)
Bogdan Kozik, Mariusz Dębski, Piotr Bąk, Małgorzata Gontarz, Małgorzata Zaborniak, Effect of heat treatment on the tensile properties of incrementally processed modified polylactide , Polimery: Vol. 66 No. 6 (2021)
M. Oleksy, G. Budzik, M. Heneczkowski, Hybrid polymer composites for rapid prototyping of gears , Polimery: Vol. 55 No. 5 (2010)
M. Żenkiewicz, K. Moraczewski, P. Rytlewski, M. Stepczyńska, T. Żuk, Characteristic and applications of single polymer composites , Polimery: Vol. 60 No. 1 (2015)
G. Sionkowski, H. Kaczmarek, Polymers with silver nanoparticles - selected systems, preparation, properties and applications , Polimery: Vol. 55 No. 7-8 (2010)

<< < 53 54 55 56 57 58 59 60 61 62 > >>

You may also start an advanced similarity search for this article.

Details

Statistics

Authors

Download files

PDF (Język Polski)

Zasady cytowania

Zaborski, M., & Pietrasik, J. (2022). Properties of carboxylated acrylonitrile/butadiene rubber containing "in situ" synthesized silica fillers. Polimery, 47(9), 643–649. Retrieved from https://polimery.ichp.vot.pl/index.php/p/article/view/2012

Citing articles via

Statistics

Total abstract views : 0

PDF Downloads : 0