Właściwości karboksylowanego kauczuku butadienowo-akrylonitrylowego zawierającego "in situ" zsyntetyzowane napełniacze krzemionkowe

M. Zaborski; J. Pietrasik

Published : 2022-09-18

Vol. 47 No. 9 (2002)

Properties of carboxylated acrylonitrile/butadiene rubber containing "in situ" synthesized silica fillers

M. Zaborski J. Pietrasik

Abstract

From silica precursors we synthesized silica fillers in sol-gel reaction in the carboxylated acrylonitrile/butadiene rubber (XNBR). N-2-aminoethyl-3-aminopropyl-trimethoxysilane (DAMS) and tetraethoxysilane (TEOS) were used as fillers' precursors. It has been found that DAMS is a substance crosslinking XNBR. The network points are silsesquioxanes' domains containing amide as well as ionic bonds. Some part of points (similar to30%) decompose under ethylenediamine treatment. The bigger DAMS content the bigger crosslinking density of elastomer as ell as the stress at suitable elongation and tensile strength Tables 2 and 4). The dynamic properties measurements show that rganosilica compounds do not influence glass transitiontemperature of elastomer (Table 6) but in the range of 30-40degreesC the second maximum appears which is a transition connected to ionic aggregates activity. Addition of a mixture of DAMS + TEOS to the elastomer causes the increase of crosslinking of silsesquioxanes' domains and the filler shows tendency to creation of its own structure (Fig. 2). Si-29 NMR results show that mostly trifunctional structures Q(3) are obtained for equal ratio of silanes (1:1) but tetrafunctional structures Q(4) are also present (Table 1). The increasing of tetrafunctional structure Q(4) content, that is a synthesis of a filler with DAMS + TEOS mixture, leads to the increase of stress at suitable elongation, and tensile strength (Table 5).

Keywords

synteza in situ ; N-2-aminoetylo-3-aminopropylotrimetoksysilan ; tetraetoksysilan ; karboksylowany kauczuk butadienowo-akrylonitrylowy ; sieciowanie ; właściwości wulkanizatów silica filler "in situ" synthesis ; N-2-aminoethyl-3-aminopropyltrimethoxysilane ; tetraethoxysilane ; carboxylated acrylonitrile-butadiene rubber ; crosslinking ; vulcanizates properties

Similar Articles

J. Lubczak, Polyurethane foams with purine rings , Polimery: Vol. 52 No. 7-8 (2007)
Julia Zienkiewicz, Maja Karczewska, Shifeng Wang, Krzysztof Formela, Rubber devulcanization in the planetary extruder – processing properties and structure , Polimery: Vol. 69 No. 6 (2024)
A. K. Bledzki, O. Faruk, A. A. Mamun, Influence of compounding processes and fibre length on the mechanical properties of abaca fibre-polypropylene composites , Polimery: Vol. 53 No. 2 (2008)
Hafsa Jamshaid, Abdul Waqar Rajput, Bilal Zahid, Sanam Memon, Raja Fahad Qureshi, Sarmad Aslam, Muhammad Nadeem, The effect of basalt knitted fabric on the properties of green epoxy resin , Polimery: Vol. 67 No. 2 (2022)
J. Kozakiewicz, G. Rokicki, J. Przybylski, K. Sylwestrzak, P. G. Parzuchowski, K. M. Tomczyk, Studies on the effect of curing conditions on the curing rate and mechanical properties of moisture-cured poly(urethane-urea) elastomers containing oligocarbonate segments , Polimery: Vol. 56 No. 7-8 (2011)
N. Mohd Nurazzi, A. Khalina, M. Chandrasekar, H.A. Aisyah, S. Ayu Rafiqah, R.A. Ilyas, Z.M. Hanafee, Effect of fiber orientation and fiber loading on the mechanical and thermal properties of sugar palm yarn fiber reinforced unsaturated polyester resin composites , Polimery: Vol. 65 No. 2 (2020)
J. Pigłowski, A. Kiersnowski, J. Dołęga, Preparation, structure and useful properties of poly(e-caprolactone)/layered silicates nanocomposites , Polimery: Vol. 51 No. 10 (2006)
W. M. Rzymski, M. Mikrut, J. Magryta, B. Wolska, Curing of acrylonitrile-butadiene rubber with tetraisobutylthiuram disulfide , Polimery: Vol. 50 No. 10 (2005)
B. Mossety-Leszczak, H. Galina, M. Włodarska, Synthesis and curing of new liquid crystalline epoxy monomers , Polimery: Vol. 48 No. 7-8 (2003)
Janusz Kozakiewicz, Jarosław Przybylski, Krystyna Sylwestrzak, Synthesis and characterization of UV-cured poly(siloxane-urethane) elastomers containing polyethylene oxide segments – as potential membrane materials , Polimery: Vol. 64 No. 2 (2019)

<< < 2 3 4 5 6 7 8 9 10 11 > >>

You may also start an advanced similarity search for this article.

Details

Statistics

Authors

Download files

PDF (Język Polski)

Zasady cytowania

Zaborski, M., & Pietrasik, J. (2022). Properties of carboxylated acrylonitrile/butadiene rubber containing "in situ" synthesized silica fillers. Polimery, 47(9), 643–649. Retrieved from https://polimery.ichp.vot.pl/index.php/p/article/view/2012

Citing articles via

Statistics

Total abstract views : 0

PDF Downloads : 0