Komputerowe modelowanie procesu formowania włókien ze stopionego polimeru krystalizującego. Cz. II. Zastosowanie modelu

L. Jarecki

Published : 2022-09-19

Vol. 46 No. 6 (2001)

Computer modeling of melt spinning from a crystallizing polymer. Part II. Applications of the mathematical model

L. Jarecki

Abstract

The model developed (cf. Part I) is used to describe melt spinning from a crystallizing poly(ethylene terephtalate) (PET). Results of the calculations are illustrated with axial profiles of local velocity, temperature, tensile stress and degree of crystallinity (Figs. 1-3, 5-8). The melt spinning involving zone heating (Figs. 9-12) allowed to disclose a limited range of spinning speeds and heating zone temperatures, consequent upon coupling of stress-induced crystallization with crystallinity-controlled solidification. This coupling also leads to multiple model solutions involving, or not involving, crystallization. The range of admissible spinning speeds is governed by the temperature of the heating zone. Model computations showed the zone heating applied in melt spinning from PET to increase considerably the amorphous orientation in fibers at moderate take-tip speeds and to reduce considerably the fiber take-up stress.

Keywords

model matematyczny ; formowanie włókien ze stopionego polimeru ; formowanie włókien z poli(tereftalanu etylenu) ; grzanie strefowe melt spinning ; melt spinning from poly(ethylene terephthalate) ; mathematical model of melt spinning ; computer modelling ; extensional flow ; Newtonian fluid ; Maxwellian fluid ; molecular orientation ; non-isothermal crystallization ; oriented crystallization

Similar Articles

M. B. Bogacki, E. Andrzejewska, M. Andrzejewski, Modeling the polymerization kinetics of a dimethacrylate monomer in the after-effect period , Polimery: Vol. 46 No. 10 (2001)
R. Steller, Effect of change of boundary conditions on the screw flow characteristic , Polimery: Vol. 51 No. 6 (2006)
Krzysztof J. Wilczyński, Kamila Buziak, Simulation of single screw extrusion of wood plastic composites based on the on-line pressure measurements , Polimery: Vol. 64 No. 2 (2019)
A. K. Błędzki, A. Jaszkiewicz, Biocomposites based on polylactide reinforced with the fibers of natural origin , Polimery: Vol. 53 No. 7-8 (2008)
Hao Huang, Yanhua Cai, Lisha Zhao, Thermal properties and processability of modified poly(L-lactide): the role of phenylacetic acid hydrazide derivative , Polimery: Vol. 67 No. 9 (2022)
Ch. L. Hébette, J. A. Delcour, M. H. J. Koch, K. Booten, H. L. Reynaers, Crystallization and melting of inulin crystals. A small angle X-ray scattering approach (SAXS) , Polimery: Vol. 56 No. 9 (2011)
K. Wilczyński, A. Lewandowski, Modelling of the polymer melt flow in a counter-rotating twin-screw extrusion process. Part I. The simulation of melt flow , Polimery: Vol. 55 No. 11-12 (2010)
K. Wilczyński, A mathematical model of single-screw extrusion. Part X. Experimental verification of the model , Polimery: Vol. 45 No. 3 (2000)
A Mehta, G. Tembe, P. Parikh, G. Mehta, A study of ethylene polymerization catalyzed by homogeneous and silsesquioxane supported Titanium(IV) complexes , Polimery: Vol. 58 No. 11-12 (2013)
A. Karaszewska, J. Bucheńska, Antibacterial polyester fibers containing silver ions. Part II. Studies on the kinetics of the release of deposited silver ions and on selected properties of modified fibers , Polimery: Vol. 55 No. 11-12 (2010)

<< < 6 7 8 9 10 11 12 13 14 15 > >>

You may also start an advanced similarity search for this article.

Details

Statistics

Authors

Download files

PDF (Język Polski)

Zasady cytowania

Jarecki, L. (2022). Computer modeling of melt spinning from a crystallizing polymer. Part II. Applications of the mathematical model. Polimery, 46(6), 420–427. Retrieved from https://polimery.ichp.vot.pl/index.php/p/article/view/2092

Citing articles via

Statistics

Total abstract views : 0

PDF Downloads : 0