Properties of composites based on polyamide 10.10 reinforced with carbon fiber

S. Kuciel; P. Kuźnia; P. Jakubowska

doi:10.14314/polimery.2016.106

Published : 2021-01-24

Vol. 61 No. 2 (2016)

Properties of composites based on polyamide 10.10 reinforced with carbon fiber

S. Kuciel P. Kuźnia P. Jakubowska

DOI: https://doi.org/10.14314/polimery.2016.106

Abstract

The test results of carbon fiber composites based on two, different, commercially available, biobased polyamide 10.10 grades are presented in this paper. The discussed materials differ in their impact resistance, strength and stiffness and, to a lesser extent, inwater absorption, which are advantageous properties that make them suitable for different structural applications.

Keywords

biocomposite ; polyamide 10.10 ; water absorption ; reinforcement efficiency biokompozyt ; poliamid 10.10 ; absorpcja wody ; efektywność wzmocnienia

Similar Articles

J. Ryszkowska, M. Auguścik, M. Leszczyńska, K. Mizera, Ł Wierzbicki, T. Szymczak, P. Lasota, K. Lipert, M. Półka, Polyurethane composite structures with 3D fabrics , Polimery: Vol. 63 No. 9 (2018)
M. M. A. Nikje, F. H. A. Mohammadi, Sorbitol/glycerin/water ternary system as a novel glycolysis agent for flexible polyurethane foam in the chemical recycling using microvawe radiation , Polimery: Vol. 54 No. 7-8 (2009)
K. Pepliński, The influence of cavity mold making technology on the efficiency of plastics processing , Polimery: Vol. 63 No. 9 (2018)
J. W. Sikora, Granulator knife wedge angle effect on constructional efficiency of the extrusion process with polyethylene , Polimery: Vol. 47 No. 3 (2002)
R. Jeziórska, Effect of oxazoline grafted polyethylene on the structure and properties of poly(butylene terephthalate)/polyamide 6 blends , Polimery: Vol. 49 No. 5 (2004)
A. Gnatowski, Studies on the influence of soaking and ultraviolet irradiation ageing on the structure of compatibilized PP/PA 6 mixtures , Polimery: Vol. 56 No. 2 (2011)
F. Brahmi, F. Meganem, A. Bel Hadj Amor, Application of poly(vinyl chloride) modified with β-amino alcohols derived from limonene oxide for removal of hazardous metal ions , Polimery: Vol. 63 No. 4 (2018)
A. Prociak, J. Pielichowski, Possibility of application of polyurethane foam wastes for heat-insulating materials preparation , Polimery: Vol. 50 No. 9 (2005)
P. Czub, Application of epoxidized soybean oil for the control of viscosity of epoxy compositions , Polimery: Vol. 51 No. 11-12 (2006)
J. M. Bik, W. Głuszewski, W. M. Rzymski, Z. P. Zagórski, Degradation of electron beam irradiated hydrogenated butadiene-acrylonitrile rubber. Influence of bounded acrylonitrile content , Polimery: Vol. 50 No. 4 (2005)

<< < 3 4 5 6 7 8 9 10 11 12 > >>

You may also start an advanced similarity search for this article.

Details

References

Statistics

Authors

Download files

PDF

Zasady cytowania

Kuciel, S., Kuźnia, P., & Jakubowska, P. (2021). Properties of composites based on polyamide 10.10 reinforced with carbon fiber. Polimery, 61(2), 106–112. https://doi.org/10.14314/polimery.2016.106

References

Kuciel S., KuŸniar P., Liber-Kneæ A.: Polimery 2012, 9, 627. http://dx.doi.org/10.14314/polimery.2012.627

[2] Zhang X.R., Pei X.Q.,Wang QH.: Journal of Materials Science 2008, 43, 4567. http://dx.doi.org/10.1007/s10853-008-2699-6

[3] Wang J., Gu M., Songhao B., Ge S.: Wear 2003, 255, 774. http://dx.doi.org/10.1016/S0043-1648(03)00268-0

[4] Ge S.R., Wang W.H., Wang J.X.: Tribology 2000, 20, 427.

[5] Zang X., Gang L., Wang D. et al.: Polymer 1998, 39, 15. http://dx.doi.org/10.1016/S0032-3861(97)00251-6

[6] Zhang X., Yin Z., Na T., Yin J.: Polymer 1997, 38, 5905. http://dx.doi.org/10.1016/S0032-3861(97)00172-9

[7] Liu T., Lim K.P., Tjiu W.C. et al.: Polymer 2003, 44, 3529. http://dx.doi.org/10.1016/S0032-3861(03)00252-0

[8] Zeng H., Goa C., Wang Y. et al.: Polymer 2006, 47, 113. http://dx.doi.org/10.1016/j.polymer.2005.11.009

[9] Rajesh J.J., Bijwe J.: Wear 2004, 256, 1. http://dx.doi.org/10.1016/S0043-1648(03)00200-X

[10] Pat. Eur. 1 971 642 B1 (2010).

[11] Feng J.H., Zhang L.H., Chen D.L.: Radiation Physics and Chemistry 1991, 38, 105.

[12] Fu S.-Y., Lauke B.: Composites Science and Technology 1998, 58, 389.

[13] „Struktura i właściwości kompozytów na osnowie termoplastów” (Ed. Wojnar L.), Politechnika Krakowska, Kraków 2005.

[14] Kelar K., Olejniczak J., Barczewski M.: Przemysł Chemiczny 2013, 92, 347.

[15] Wang B., Sun G., Liu J. et al.: Journal of Applied Polymer Science 2006, 100, 3794. http://dx.doi.org/ 10.1002/app.23805

[16] Wang B.,Wan T., ZengW. et al.: Polymer International 2012, 61, 1462. http://dx.doi.org/10.1002/pi.4236

[17] Kelar K.: ATMiA 2007, 27, 179.

[18] Klata E., Borysiak S., Van de Velde K. et al.: Fibres and Textiles in Eastern Europe 2004, 12, 64.

[19] Phang I.Y., Ma J., Shen L. et al.: Polymer International 2006, 55, 71. http://dx.doi.org/10.1002/pi.1920.

Google Scholar

Altmetric indicators

Citing articles via

Statistics

Total abstract views : 0

PDF Downloads : 0

S. Kuciel stask@mech.pk.edu.pl

Affiliation
Cracow University of Technology, Institute of Materials Engineering, Faculty of Mechanical Engineering, Al. Jana Pawła II 37, 31-864 Cracow, Poland

P. Kuźnia

Affiliation
Cracow University of Technology, Institute of Materials Engineering, Faculty of Mechanical Engineering, Al. Jana Pawła II 37, 31-864 Cracow, Poland

P. Jakubowska

Affiliation
Poznan University of Technology, Institute of Technology and Chemical Engineering, Faculty of Chemical Technology, ul. Berdychowo 4, 60-965 Poznan, Poland