Magnetorheological materials based on ethylene-octene elastomer

M. Masłowski; M. Zaborski

doi:10.14314/polimery.2014.825

Published : 2014-12-30

Vol. 59 No. 11-12 (2014)

Magnetorheological materials based on ethylene-octene elastomer

M. Masłowski M. Zaborski

DOI: https://doi.org/10.14314/polimery.2014.825

Abstract

Magnetorheological elastomer composites based on several magnetoactive fillers such as: carbonyl iron powder, gamma iron oxide, micro- and nano-sized Fe3O4 in ethylene-octene elastomer are reported and studied. To improve the dispersion of the applied fillers in a polymer matrix, ionic liquids were added during the process of composite preparation. To align the particles in the elastomer, the crosslinking process took place in a magnetic field. The effect of the amount of ferromagnetic particles and their arrangement on the microstructure and properties in relation to the external magnetic field was examined. It was found that the microstructure isotropy and anisotropy has a significant effect on the properties of the magnetorheological elastomers. Moreover, different amounts of magnetoactive fillers influence the mechanical properties (increase the tensile strength) of the composites compared to unfilled samples. The magnetic flux directed parallel to the sample surface increases the saturation magnetization of the composites. Magnetic anisotropy can also be seen by analyzing the shape of magnetization curves — steeper curves obtained for anisotropic samples support the hypothesis of a specific arrangement of the filler particles in the elastomer. The addition of ionic liquids improve the dispersion of the applied magnetoactive fillers (CIP and g-Fe2O3) in the elastomer matrix, which in turn favorably affected the network density, tensile properties and magnetorheological effect of the composites.

Keywords

magnetorheological elastomers ; magnetic fillers ; ethylene-octene elastomer ; microstructure ; ionic liquids ; magnetic properties ; magnetorheological properties ; smart materials elastomery magnetoreologiczne ; napełniacze magnetyczne ; elastomer etylenowo-oktenowy ; mikrostruktura ; ciecze jonowe ; właściwości magnetyczne ; właściwości magnetoreologiczne ; materiały inteligentne

Similar Articles

Andrzej Dworak, Alicja Utrata-Wesołek, Łukasz Otulakowski, Maciej Kasprów, Barbara Trzebicka, Polymers in medicine – direction of development , Polimery: Vol. 64 No. 10 (2019)
E. Andrzejewska, A. Marcinkowska, A. Zgrzeba, Ionogels – materials containing immobilized ionic liquids , Polimery: Vol. 62 No. 5 (2017)
Katarzyna Bulanda, Mariusz Oleksy, Rafał Oliwa, Grzegorz Budzik, Małgorzata Gontarz, Biodegradable polymer composites based on polylactide used in selected 3D technologies , Polimery: Vol. 65 No. 7-8 (2020)
K. Kwiatkowski, Z. Rosłaniec, Study of welding of poly(ether-ester) elastomers. Part I. Influence of contents of flexible segments on morphology and mechanical properties , Polimery: Vol. 49 No. 4 (2004)
Małgorzata Szymiczek, Sara Sarraj, Monika Chomiak, Błażej Chmielnicki, Izabela Gajlewicz, Structure and properties of self-extinguishing rigid polyurethane foam with inorganic filler , Polimery: Vol. 69 No. 4 (2024)
Z. Majchrzak, J. Lipczyński, Preparation and characteristics of polypropylene composites , Polimery: Vol. 52 No. 3 (2007)
Nur'Aishah Ahmad Shahrim, Nur Nadia Mohd Hafiz, Zuraida Ahmad, Yose Fachmi Buys, Norshahida Sarifuddin, Ink based on poly(3,4-ethylene dioxythiophene), poly(sulfonostyrene) and silver nanoparticles (PEDOT/PSS/SNP) blends for fabrics printing , Polimery: Vol. 67 No. 6 (2022)
K. Gawdzińska, A. Gądek-Moszczak, K. Bryll, I. Irska, S. Paszkiewicz, Influence of water absorption on chosen strength properties of single-polymer polyester composites , Polimery: Vol. 63 No. 4 (2018)
Agnieszka Kowalczyk, Agata Kraśkiewicz, Mateusz Weisbrodt, Krzysztof Kowalczyk, Hydrogels based on poly(2-hydroxyethyl methacrylate) and nettle extract , Polimery: Vol. 68 No. 9 (2023)
D. Marciniak, P. Szewczykowski, P. Czyżewski, D. Sykutera, M. Bieliński, Effect of surface modification by acetone vaporization on the structure of 3D printed acrylonitrile-butadiene-styrene elements , Polimery: Vol. 63 No. 11-12 (2018)

<< < 1 2 3 4 5 6 7 8 9 10 > >>

You may also start an advanced similarity search for this article.

Details

References

Statistics

Authors

Download files

PDF

Zasady cytowania

Masłowski, M., & Zaborski, M. (2014). Magnetorheological materials based on ethylene-octene elastomer. Polimery, 59(11-12), 825–833. https://doi.org/10.14314/polimery.2014.825

References

Rabinow J.: AIEE Trans 1948, 67, 1308.

[2] Li W.H., Zhang X.Z., Du H.: “Magnetorheological elastomers and their applications” in “Advances in Elastomer I” (Ed. Visakh P.M.), Springer Berlin Heidelbergm 2013, pp. 357—374. http://dx.doi.org/10.1007/978-3-642-20925-3_12

[3] Milecki A., Hauke M.: Mech. Sys. Sig. Process. 2012, 28, 528. http://dx.doi.org/10.1016/j.ymssp.2011.11.008

[4] Boczkowska A., Awietjan S.: Polimery 2009, 54, 26.

[5] Wang X.J., Gordaninejad F.: “Proceedings of the ASME conference on smart materials, adaptive structures and intelligent systems”, 2009, pp. 869—874.

[6] Danas K., Kankanala S.V., Triantafyllidis N.: J. Mech. Phys. Solids 2012, 60, 120. http://dx.doi.org/10.1016/j.jmps.2011.09.006

[7] Rudykh S., Bartoldi K.: J. Mech. Phys. Sol. 2013, 61 (4), 949. http://dx.doi.org/10.1016/j.jmps.2012.12.008

[8] Kaleta J., Królewicz M., Lewandowski D.: Smart Mater. Struct. 2011, 20 (8), 085006. http://dx.doi.org/10.1088/0964-1726/20/8/085006

[9] Lu X., Qiao X., Watanabe H., Gong X., Yang T., Li W., Sun K., Li M., Yang K., Xie H., Yin Q.,Wang D.: Rheol. Acta 2012, 51 (1), 37.

[10] Hoang N., Zhang N., Du H.: Smart Mater. Struct. 2011, 20, 015019. http://dx.doi.org/10.1088/0964-1726/20/1/015019

[11] Tian T.F., LiW.H., Deng Y.M.: Smart Mater. Struct. 2011, 20, 025022. http://dx.doi.org/10.1088/0964-1726/20/2/025022

[12] Zadov B., Elmalem A., Paperno E., Gluzman I., Nudelman A. et al.: Adv. Condens. Matter Phys. 2012, 18, 383 728. http://dx.doi.org/10.1155/2012/383728

[13] Faidley L.E., Han Y., HongW.: Smart Mater. Struct. 2010, 19, 075001. http://dx.doi.org/10.1088/0964-1726/19/7/075001

[14] Snyder R.L., Nguyen V.Q., Ramanujan R.V.: Smart Mater. Struct. 2010, 19, 055017. http://dx.doi.org/10.1088/0964-1726/19/5/055017

[15] Zhao X., Kim J., Cezar C., Huebsch N., Lee K., Bouhadir K., Mooney D.: Proc. Nat. Acad. Sci. 2011, 108, 67. http://dx.doi.org/10.1073/pnas.1007862108

[16] Zitoun D., Respaud M., Fromen M.C., Casanove M.J., Lecante P., Amiens C., Chaudret B.: Phys. Rev. Lett. 2002, 89, 4. http://dx.doi.org/10.1103/PhysRevLett.89.037203

[17] Wang Z.L., Petroski J.M., Green T.C., El-Sayed M.A.: J. Phys. Chem. B. 1998, 102, 6145.

[18] Klasovsky F., Claus P.: “Metal nanoclusters in catalysis and material science: the issue of size control” (Eds. Corain B., Schmid G., Toshima N.), Elsevier, Amsterdam 2008. http://dx.doi.org/10.1016/B978-044453057-8.50010-6

[19] Aiken III J.D., Finke R.G.: J. Mol. Cat. A 1999, 145, 1.

[20] Kraynov A., Richards R.: Phys. Chem. Chem. Phys. 2007, 9, 884. http://dx.doi.org/10.1039/B615470K

[21] Li J., Gong X.L., Zhu H., JiangW.Q.: Pol. Test. 2009, 28, 331. http://dx.doi.org/10.1016/j.polymertesting.2009.01.008

[22] Masłowski M., Zaborski M.: Mater. Sci. Forum 2012, 714, 167.

Google Scholar

Altmetric indicators

Citing articles via

Statistics

Total abstract views : 0

PDF Downloads : 0

M. Masłowski marcin.maslowski@p.lodz.pl

Affiliation
Institute of Polymer & Dye Technology, Technical University of Lodz, Stefanowskiego 12/16, 90-924 Lodz, Poland

M. Zaborski

Affiliation
Institute of Polymer & Dye Technology, Technical University of Lodz, Stefanowskiego 12/16, 90-924 Lodz, Poland