Język Polski
English
Published
: 2021-12-23
The new functional filler TiO2-SiO2/polyhedral oligomeric hybrid silsesquioxane as a potential modifier of polyethylene
Abstract
The paper presents preliminary application studies of the innovative TiO2-SiO2/ POSS filler as a potential low-density polyethylene modifier. It was found that the addition of the filler increases the stiffness and hardness of the composite and slightly changes the intensity of its color.
Most read articles by the same author(s)
- Mateusz Barczewski, Kinga Biedrzycka, Olga Mysiukiewicz, Danuta Matykiewicz, Jacek Andrzejewski, Arkadiusz Kloziński, Marek Szostak, Milled basalt fibers as reinforcement for polyurea composite spray coatings with improved thermomechanical stability and mechanical performance , Polimery: Vol. 65 No. 3 (2020)
- Arkadiusz Klozinski, Mateusz Barczewski, Comparison of off -line, on-line and in-line measuring techniques used for determining the rheological characteristics of polyethylene composites with calcium carbonate , Polimery: Vol. 64 No. 2 (2019)
- Arkadiusz Kloziński, Paulina Jakubowska, Joanna E. Przybylska, Robert Przekop, Application of in-line rheological measurements for characterization of polypropylene/opoka rock powder composites , Polimery: Vol. 64 No. 4 (2019)
- Mateusz Barczewski, Jacek Andrzejewski, Danuta Matykiewicz, Agnieszka Krygier, Arkadiusz Kloziński, Influence of accelerated weathering on mechanical and thermomechanical properties of poly(lactic acid) composites with natural waste filler , Polimery: Vol. 64 No. 2 (2019)
- Arkadiusz Kloziński, Małgorzata Szczepańska, Paulina Jakubowska, Bronisław Samujło, Mateusz Barczewski, Grzegorz Lota, The influence of calcium carbonate and its modifications on the extrusion process and selected functional properties of polypropylene cast films , Polimery: Vol. 67 No. 10 (2022)
- Sandra Paszkiewicz, Grzegorz Kramek, Konrad Walkowiak, Izabela Irska, Elżbieta Piesowicz, Monika Rzonsowska, Beata Dudziec, Mateusz Barczewski, Thermal and mechanical properties of PLA/ENR thermoplastic vulcanizates compatibilized with tetrafunctional double-decker silsesquioxanes , Polimery: Vol. 68 No. 11-12 (2023)
- Arkadiusz Kloziński, Krzysztof Lewandowski, Jacek Mirowski, Mateusz Barczewski, Paulina Jakubowska, Rheological properties of polypropylene composites with calcium carbonate under high shear rates , Polimery: Vol. 68 No. 7-8 (2023)
Similar Articles
- Katarzyna Bulanda, Mariusz Oleksy, Rafał Oliwa, Grzegorz Budzik, Małgorzata Gontarz, Biodegradable polymer composites based on polylactide used in selected 3D technologies , Polimery: Vol. 65 No. 7-8 (2020)
- Karolina Młynarczyk, Filip Longwic, Beata Podkościelna, Tomasz Klepka, Influence of natural fillers on the thermal and mechanical properties of epoxy resin composites , Polimery: Vol. 67 No. 3 (2022)
- S. Ravichandran, A. Daniel Raj, P. Balaji Visvanath, Faruq Mohammad, Hamad A. Al-Lohedan, Suresh Sagadevan, Influence of fiber reinforcement towards the physical characteristics of low density polyethylene laminated composites , Polimery: Vol. 65 No. 6 (2020)
- M.D. Hazrol, S.M. Sapuan, R.A. Ilyas, E.S. Zainudin, M.Y.M. Zuhri, N.I. Abdul Wahab, Morphology and selected properties of kenaf fiber/cornhusk reinforced corn starch hybrid biocomposites , Polimery: Vol. 67 No. 11-12 (2022)
- P. Łoś, A. Łukomska, S. Kowalska, R. Jeziórska, J. Krupka, Properties of polymer composites with copper powders or flakes as fillers , Polimery: Vol. 57 No. 5 (2012)
- Rafał Oliwa, Katarzyna Bulanda, Mariusz Oleksy, Paulina Ostyńska, Grzegorz Budzik, Magdalena Płocińska, Sławomir Krauze, Fire resistance and mechanical properties of powder-epoxy composites reinforced with recycled glass fiber laminate , Polimery: Vol. 65 No. 4 (2020)
- Anandha Moorthy Appusamy, Natarajan Nanjappan, Prakash Eswaran, Madheswaran Subramanian, The effect of natural Gongura roselle fiber on the mechanical properties of 3D printed ABS and PLA composites , Polimery: Vol. 67 No. 3 (2022)
- Sandra Paszkiewicz, Grzegorz Kramek, Konrad Walkowiak, Izabela Irska, Elżbieta Piesowicz, Monika Rzonsowska, Beata Dudziec, Mateusz Barczewski, Thermal and mechanical properties of PLA/ENR thermoplastic vulcanizates compatibilized with tetrafunctional double-decker silsesquioxanes , Polimery: Vol. 68 No. 11-12 (2023)
- Małgorzata Krasowska, Rafał Oliwa, Mariusz Oleksy, Tomasz Galek, Photocured unsaturated polyester composites reinforced with glass and natural fiber used in the pipeline renovation , Polimery: Vol. 69 No. 6 (2024)
- M. Barczewski, M. Szostak, D. Nowak, A. Piasecki, Effect of wood flour addition and modification of its surface on the properties of rotationally molded polypropylene composites , Polimery: Vol. 63 No. 11-12 (2018)
You may also start an advanced similarity search for this article.
Details
References
Statistics
Authors
Zasady cytowania
Kloziński, A., Ambrożewicz, D., Jakubowska, P., Dudziec, B., Andrzejewska, E., Marciniec, B., & Jesionowski, T. (2021). The new functional filler TiO2-SiO2/polyhedral oligomeric hybrid silsesquioxane as a potential modifier of polyethylene. Polimery, 66(11-12), 602–610. https://doi.org/10.14314/polimery.2021.11.5
