Synthesis, characterization and electrochemical properties of poly-4-[1-(4-hydroxyphenyl)ethylideneamino]phenol

I. Kaya; A. Bilici

Published : 2009-02-12

Vol. 54 No. 2 (2009)

Synthesis, characterization and electrochemical properties of poly-4-[1-(4-hydroxyphenyl)ethylideneamino]phenol

I. Kaya A. Bilici

Abstract

The polymer of 4-[1-(4-hydroxyphenyl)ethylideneamino]phenol (4-HPEAP) being a Schiff base substitute was formed with use of oxidants such as air O2, H2O2 or NaOCl in an aqueous alkaline medium. The yield of polymer was found to be 95, 51 and 96% for air O2, H2O2 and NaOCl, respectively. During these polymerization reactions of 4-HPEAP, H2O2 demonstrated lower activity than NaOCl and air O2. The spectral analyses results such as 1H NMR and 13C NMR showed that the phenol units were connected at ortho positions, forming the C-C coupling system. The polymer was found to show relatively high thermal stability. This polymer lost half of the weight at 230°C. The highest occupied molecular orbital (HOMO), the lowest unoccupied molecular orbital (LUMO) and electrochemical energy gaps (E'g) of 4-HPEAP and P-4-HPEAP were found to be -6.30, -6.15; -2.41, -2.57; 3.89 and 3.58eV, respectively. According to UV-Vis measurements, the optical band gaps (Eg) of 4-HPEAP and P-4-HPEAP were found to be 3.56 and 3.47eV, respectively.

Keywords

utleniająca polikondensacja ; poli-4-[1-(4-hydroksyfenylo)etylidenoamino]fenol ; analiza termiczna ; przewodnictwo ; właściwości optyczne i elektrochemiczne oxidative polycondensation ; poly-4-[1-(4-hydroxyphenyl)ethylideneamino] phenol ; thermal analysis ; conductivity ; optic and electrochemical properties

Similar Articles

E. Malewska, M. Trzyna, A. Sabanowska, A. Prociak, P. Koniorczyk, The influence of expandable polystyrene fillers on properties of water-blown rigid polyurethane foams , Polimery: Vol. 56 No. 11-12 (2011)
M. Kędzierski, P. Jankowski, G. Jaworska, A. Niska, Graphite oxide as an intumescent flame retardant for polystyrene , Polimery: Vol. 57 No. 5 (2012)
Abid Ouerghui, Faycel Ammari, Christian Girard, The use of chemically modified PVC waste to remove ions from wastewater , Polimery: Vol. 65 No. 11-12 (2020)
R. Ukielski, A. Kozłowska, Reversible endothermic process observed by dsc in thermoplastic multiblock elastomers at middle temperature range , Polimery: Vol. 48 No. 11-12 (2003)
A. Duda, S. Penczek, Polylactide [poly(lactic acid)]: synthesis, properties and applications , Polimery: Vol. 48 No. 1 (2003)
A. Prociak, M. Figura, Rigid polyurethane foams moulded with new generation blowing agents , Polimery: Vol. 48 No. 7-8 (2003)
Z. Wirpsza, A. Białkowska, Segmented condensation polyether urethanes as components of leatherlike polymers , Polimery: Vol. 47 No. 5 (2002)
W. Mazela, P. Czub, J. Pielichowski, Application of epoxy resins in electronics and optoelectronics. Part 1. Mechanical properties and thermal stability of epoxy resins used for encapsulation of electronic devices , Polimery: Vol. 49 No. 4 (2004)
S. Frąckowiak, M. Kozłowski, Electrically conductive polymeric composites as potential sensor materials , Polimery: Vol. 55 No. 5 (2010)
W. Brostow, V.M. Castano, J. Horta, G. Martinez-Barrera, Gamma irradiation effects on impact strength and thermal properties of SBR-toughened polystyrene , Polimery: Vol. 49 No. 1 (2004)

<< < 19 20 21 22 23 24 25 26 27 28 > >>

You may also start an advanced similarity search for this article.

Details

Statistics

Authors

Download files

PDF

Zasady cytowania

Kaya, I., & Bilici, A. (2009). Synthesis, characterization and electrochemical properties of poly-4-[1-(4-hydroxyphenyl)ethylideneamino]phenol. Polimery, 54(2), 106–113. Retrieved from https://polimery.ichp.vot.pl/index.php/p/article/view/1181

Altmetric indicators

Citing articles via

Statistics

Total abstract views : 0

PDF Downloads : 0