Composites of unsaturated polyester resins applied in vacuum casting technology

M. Oleksy; M. Heneczkowski; G. Budzik

Published : 2022-08-23

Vol. 53 No. 2 (2008)

Composites of unsaturated polyester resins applied in vacuum casting technology

M. Oleksy M. Heneczkowski G. Budzik

Abstract

The paper deals with hydrophobization of bentonites (layered aluminosilicates) with quaternary ammonium salts (QAS) and potential application of the products obtained as fillers for preaccelerated unsaturated polyester resins (UPs) to be applied in vacuum casting. Natural purified bentonites of "Special" and "SN" type, enriched with montmorillonite and modified with QAS according to the earlier patented method were used. An addition of modified bentonites (1.5 or 3.0phr) to commercial preaccelerated UPs, caused a considerable improvement in mechanical properties (tensile strength, Brinell hardness and Charpy impact strength). Also, a clear effect of nanofiller concentration in resin on the quality of cast products was observed.

Keywords

preakcelerowana nienasycona żywica poliestrowa ; bentonity ; organogliny ; nanocząstki ; nanokompozyty ; właściwości mechaniczne ; odlewanie próżniowe preaccelerated unsaturated polyester resin ; bentonites ; organic aluminum compounds ; nanoparticles ; nanocomposites ; mechanical properties ; vacuum casting

Similar Articles

M. Oleksy, M. Heneczkowski, G. Budzik, Application of computer simulation of thermoset resins casting in rapid prototyping techniques , Polimery: Vol. 55 No. 11-12 (2010)
E. Fabbri, P. Fabbri, M. Messori, F. Pilati, C. Tonelli, M. Toselli, Surface modification of unsaturated polyester resins with perfluoropolyethers , Polimery: Vol. 49 No. 11-12 (2004)
G. Groszek, J. Maziopa, Catalysts of the synthesis of vinylester resins from epoxynovolac and unsaturated monocarboxylic acid , Polimery: Vol. 49 No. 11-12 (2004)
R. Jeziórska, B. Świerz-Motysia, A. Szadkowska, Modifiers applied in polymer recycling: processing, properties and application , Polimery: Vol. 55 No. 10 (2010)
E. Kicko-Walczak, P. Jankowski, Effect of halogen free modification of epoxy resins on their fire retardancy levels , Polimery: Vol. 50 No. 11-12 (2005)
S. Frąckowiak, M. Kozłowski, Electrically conductive polymeric composites as potential sensor materials , Polimery: Vol. 55 No. 5 (2010)
E. Hałasa, M. Heneczkowski, Curing of bisphenol A-based liquid epoxy resins with polyamine—2-mercaptobenzothiazole adducts and synthesis of the adducts , Polimery: Vol. 46 No. 10 (2001)
Gulzar Ahmad Baig, Coloration of poly(lactic acid) based textiles – a review , Polimery: Vol. 65 No. 6 (2020)
K. Formela, M Cysewska, Efficiency of thermomechanical reclaiming of ground tire rubber conducted in counter-rotating and co-rotating twin screw extruder , Polimery: Vol. 59 No. 3 (2014)
Preethi Ravikumar, Suresh Sagadevan, Influence of the addition of chitin nanocrystals on the characteristics of cellulose acetate films , Polimery: Vol. 66 No. 2 (2021)

<< < 26 27 28 29 30 31 32 33 34 35 > >>

You may also start an advanced similarity search for this article.

Details

References

Statistics

Authors

Download files

PDF

Zasady cytowania

Oleksy, M., Heneczkowski, M., & Budzik, G. (2022). Composites of unsaturated polyester resins applied in vacuum casting technology. Polimery, 53(2), 144–147. Retrieved from https://polimery.ichp.vot.pl/index.php/p/article/view/1296

Altmetric indicators

Citing articles via

Statistics

Total abstract views : 0

PDF Downloads : 0

M. Oleksy molek@prz.rzeszow.pl

Affiliation
Rzeszow University of Technology, Faculty of Chemistry, Department of Polymer, 35-959 Rzeszow, Poland

M. Heneczkowski

G. Budzik