Composites of unsaturated polyester resins applied in vacuum casting technology

M. Oleksy; M. Heneczkowski; G. Budzik

Published : 2022-08-23

Vol. 53 No. 2 (2008)

Composites of unsaturated polyester resins applied in vacuum casting technology

M. Oleksy M. Heneczkowski G. Budzik

Abstract

The paper deals with hydrophobization of bentonites (layered aluminosilicates) with quaternary ammonium salts (QAS) and potential application of the products obtained as fillers for preaccelerated unsaturated polyester resins (UPs) to be applied in vacuum casting. Natural purified bentonites of "Special" and "SN" type, enriched with montmorillonite and modified with QAS according to the earlier patented method were used. An addition of modified bentonites (1.5 or 3.0phr) to commercial preaccelerated UPs, caused a considerable improvement in mechanical properties (tensile strength, Brinell hardness and Charpy impact strength). Also, a clear effect of nanofiller concentration in resin on the quality of cast products was observed.

Keywords

preakcelerowana nienasycona żywica poliestrowa ; bentonity ; organogliny ; nanocząstki ; nanokompozyty ; właściwości mechaniczne ; odlewanie próżniowe preaccelerated unsaturated polyester resin ; bentonites ; organic aluminum compounds ; nanoparticles ; nanocomposites ; mechanical properties ; vacuum casting

Similar Articles

E. Hałasa, Polyimides. Part II. Processing, functional properties and application , Polimery: Vol. 48 No. 4 (2003)
Z. Wiącek, Estimation of adhesive properties of oxidated surfaces of aluminum alloys in the light of theory of adsorption , Polimery: Vol. 48 No. 3 (2003)
R. Jeziórska, Effect of poly(butylene terephthalate) functionalized with 2,2'-(1,3-phenylene)-bis(2-oxazoline) on the structure and properties of polyamide 6 blends with textile waste containing poly(ethylene terephthalate) , Polimery: Vol. 53 No. 3 (2008)
L. Rosu, C. Ciobanu, D. Rosu, C. N. Cascaval, Preparation and characterization of silver sulfathiazole-epoxy resin networks , Polimery: Vol. 53 No. 9 (2008)
Z. Czech, 2-Vinyloxycarbonyloxymethyl antraquinone as a new unsaturated photoinitiator for UV-cured acrylic pressure-sensitive adhesives , Polimery: Vol. 51 No. 10 (2006)
J. Duliban, Studies on activity of s-triazine ring containing amine modifiers in curing of unsaturated polyester resins , Polimery: Vol. 49 No. 11-12 (2004)
S. Połowiński, Nonwoven fabrics modified with deposited nanolayers , Polimery: Vol. 52 No. 5 (2007)
B. Samujło, A. Rudawska, Influence of modification of low-density polyethylene with aluminum trihydroxide on its surface free energy , Polimery: Vol. 55 No. 11-12 (2010)
A. Kozłowska, J. Majszczyk, Relaxation processes and phase structure of ester-etheramide copolymers , Polimery: Vol. 50 No. 11-12 (2005)
J. Pielichowski, M. Marek, A. Prociak, Possibility of application of glycerol for selection of polyurethane foam systems compositions , Polimery: Vol. 50 No. 10 (2005)

<< < 41 42 43 44 45 46 47 48 49 50 > >>

You may also start an advanced similarity search for this article.

Details

References

Statistics

Authors

Download files

PDF

Zasady cytowania

Oleksy, M., Heneczkowski, M., & Budzik, G. (2022). Composites of unsaturated polyester resins applied in vacuum casting technology. Polimery, 53(2), 144–147. Retrieved from https://polimery.ichp.vot.pl/index.php/p/article/view/1296

Altmetric indicators

Citing articles via

Statistics

Total abstract views : 0

PDF Downloads : 0

M. Oleksy molek@prz.rzeszow.pl

Affiliation
Rzeszow University of Technology, Faculty of Chemistry, Department of Polymer, 35-959 Rzeszow, Poland

M. Heneczkowski

G. Budzik