Niekonwencjonalne sieciowanie mieszanin chlorosulfonowanego polietylenu i karboksylowanego kauczuku butadienowo-akrylonitrylowego

M. Kozioł; W. M. Rzymski

Published : 2022-09-01

Vol. 50 No. 7-8 (2005)

Unconventional crosslinking of the blends of chlorosulfonated polyethylene and carboxylated acrylonitrile-butadiene rubber

M. Kozioł W. M. Rzymski

Abstract

Interpolymeric crosslinking of chlorosulfonated polyethylene/carboxylated acrylonitrile-butadiene rubber blends (CSM/XNBR) (Table 2) with MgO in the presence of stearic acid at temp. 433 K (160 oC) for 30 min has been investigated. Effect of CSM containing various amounts of chlorine bonded (Table 1) on the properties of CSM/XNBR blends was studied as well. Extent of crosslinking was estimated on the basis of determinations of vulcametric torque (L) (Fig. 1), equilibrium swelling (Qv) in selected solvents and sol fraction content (fraction soluble in 2-butanone - S) (Tables 3 and 5). It was found that CSM did not undergo crosslinking in given conditions while in the blend with XNBR the interpolymeric reaction of both elastomers occurred. It was confirmed by bounded chlorine values, S and IR analysis (Fig. 2, Table 4). It was observed that degree of CSM bonding with the network depends on its type and content in the blend. Tensile strength (TSb), elongation at break (Eb) temperature dependence of dynamic loss tangent (tgd) and storage modulus (E') (Fig. 3) were determined using dynamic mechano-thermal analysis (DMTA) of cured CSM/XNBR blends. There were found ionic interpolymeric bonds of structure ~C-CO-O-+Mg+-O-SO2-C~ in cured CSM/XNBR blend [equations (1)-(3)] which gave the blend high mechanical strength and act as chemical compatibilizer.

Keywords

polietylen chlorosulfonowany ; karboksylowany kauczuk butadienowo-akrylonitrylowy ; mieszaniny elastomerów ; sieciowanie ; wiązania interpolimerowe ; właściwości mechaniczne chlorosulfonated polyethylene ; carboxylated acrylonitrile-butadiene rubber ; blends of elastomers ; crosslinking ; interpolymeric bonds ; mechanical properties

Similar Articles

M. Iwański, G. Mazurek, Rheological characteristics of synthetic wax-modified asphalt binders , Polimery: Vol. 57 No. 9 (2012)
M. Mucha, I. Michalak, J. Balcerzak, M. Tylman, Chitosan scaffolds, films and microgranules for medical application — preparation and drug release studies , Polimery: Vol. 57 No. 10 (2012)
P. Król, B. Król, Waterborne polyurethane cationomers synthesized from 4,4’-methylenebis(phenyl isocyanate) or isophorone diisocyanate, polyesters and N-methyl or N-butyldiethanolamine — analysis of the structure and selected properties of the obtained coatings , Polimery: Vol. 57 No. 11-12 (2012)
T. Garbacz, Structure and properties of cellular thin-walled cable coatings , Polimery: Vol. 57 No. 11-12 (2012)
A. Rozanski, A. Galeski, Modification of amorphous phase of semicrystalline polymers , Polimery: Vol. 57 No. 6 (2012)
A. Szymczyk, Z. Roslaniec, Non-isothermal crystallization of poly(trimethylene terephthalate)/single-walled carbon nanotubes nanocomposites , Polimery: Vol. 57 No. 3 (2012)
J. Kucińska-Lipka, I. Gubańska, H. Janik, Polyurethanes modified with natural polymers for medical application. Part 1. Polyuretane/chitosan and polyurethane/collagen , Polimery: Vol. 58 No. 9 (2013)
A. Utrata-Wesołek, Antifouling surfaces in medical application , Polimery: Vol. 58 No. 9 (2013)
K. Szwarc-Rzepka, M. Walkowiak, M. Osińska-Broniarz, M. Dutkiewicz, H. Maciejewski, T. Jesionowski, Preparation of functionalised SiO2/F-SF poss hybrid fillers and their application in gel polymer electrolytes , Polimery: Vol. 58 No. 10 (2013)
M. Zaborski, A. Strąkowska, A. Kosmalska, H. Maciejewski, M. Dutkiewicz, POSS compounds as modifiers and additives for elastomeric composites , Polimery: Vol. 58 No. 10 (2013)

<< < 115 116 117 118 119 120 121 122 123 124 > >>

You may also start an advanced similarity search for this article.

Details

References

Statistics

Authors

Download files

PDF (Język Polski)

Zasady cytowania

Kozioł, M., & Rzymski, W. M. (2022). Unconventional crosslinking of the blends of chlorosulfonated polyethylene and carboxylated acrylonitrile-butadiene rubber. Polimery, 50(7-8), 587–592. Retrieved from https://polimery.ichp.vot.pl/index.php/p/article/view/1667

Citing articles via

Statistics

Total abstract views : 0

PDF Downloads : 0

M. Kozioł

Affiliation
Politechnika Łódzka, Instytut Polimerów, ul. Stefanowskiego 12/16, 90-924 Łódź

W. M. Rzymski rzymski@p.lodz.pl

Affiliation
Politechnika Łódzka, Instytut Polimerów, ul. Stefanowskiego 12/16, 90-924 Łódź