Właściwości wysokoudarowego polistyrenu uniepalnionego przy użyciu wodorotlenku magnezu i modyfikowanego trójblokowym kopolimerem styren/butadien/styren

J. Garbarski; M. Fabijański

Published : 2022-09-01

Vol. 50 No. 3 (2005)

Properties of high impact polystyrene flame retarded by magnesium hydroxide and modified with triblock copolymer styrene/butadiene/styrene

J. Garbarski M. Fabijański

Abstract

Mechanical, combustible and smoke properties of two series of high impact polystyrene (PS-HI) compositions differing in the content of flame retardant [Mg(OH)2] and amount of a modifier (SBS) mentioned in the title (Table 1). In the first series of experiments [50 wt. % of Mg(OH)2] it has been found that modification with 15 wt. % of SBS causes significant increase in impact strength (U) (Fig. 1) and decrease in maximum strength (Ru), Young modulus (E) and hardness (HK) (Fig. 2-4). Also oxygen index (OI) deteriorated (Fig. 5). Decreases in values of exposure (S) and illumination at fourth minute (E4) (Fig. 6 and 7) show the increased smoke evolution. In the other series of experiments Mg(OH)2 content was increased up to 55 wt. % and various amounts of SBS were used (4.5, 13.5 or 22.5 wt. %). It was observed that U and Ru increased with SBS content increase (Fig. 8 and 9) while E and HK lowered clearly (Fig. 10 and 11). Increase in modifier amount positively influenced OI (Fig. 12) and improved smoke properties (Fig. 13 and 14). Flame retardant used caused that the plastic did not melt and did not flow as burning drops. None of the samples was burnt despite small thickness (5 mm).

Keywords

polistyren wysokoudarowy ; uniepalnianie ; wodorotlenek magnezu ; kopolimer styren-butadien-styren ; właściwości mechaniczne ; wskaźnik tlenowy ; intensywność dymienia high impact polystyrene ; flame retardation ; magnesium hydroxide ; copolymer styrene/butadiene/styrene ; mechanical properties ; oxygen index ; smoke intensity

Similar Articles

Chao Meng, Effect of ethanol-assisted mixing on the selected properties and homogeneity of NR/BR blends , Polimery: Vol. 68 No. 3 (2023)
D. Paukszta, M. Szostak, M. Rogacz, Mechanical properties of polypropylene copolymers composites filled with rapeseed straw , Polimery: Vol. 59 No. 2 (2014)
Anandha Moorthy Appusamy, Natarajan Nanjappan, Prakash Eswaran, Madheswaran Subramanian, The effect of natural Gongura roselle fiber on the mechanical properties of 3D printed ABS and PLA composites , Polimery: Vol. 67 No. 3 (2022)
J. Kozakiewicz, G. Rokicki, J. Przybylski, K. Sylwestrzak, P. G. Parzuchowski, K. M. Tomczyk, Studies on the effect of curing conditions on the curing rate and mechanical properties of moisture-cured poly(urethane-urea) elastomers containing oligocarbonate segments , Polimery: Vol. 56 No. 7-8 (2011)
A. K. Bledzki, O. Faruk, A. A. Mamun, Influence of compounding processes and fibre length on the mechanical properties of abaca fibre-polypropylene composites , Polimery: Vol. 53 No. 2 (2008)
T. Smal, Methodology of assessment of adhesive composites’ properties , Polimery: Vol. 58 No. 2 (2013)
Regina Jeziórska, Ewa Spasówka-Kumosińska, Agnieszka Szadkowska, Maciej Studziński, Magdalena Żubrowska, Novel polyamide 6 nanocomposites with graphene oxide-modified silica , Polimery: Vol. 69 No. 11-12 (2024)
J. Rybnicek, R. Lach, W. Grellmann, M. Lapcikova, M. Slouf, Z. Krulis, E. Anisimov, J. Hajek, Ternary PC/ABS/PMMA blends — morphology and mechanical properties under quasi-static loading conditions , Polimery: Vol. 57 No. 2 (2012)
Rafał Oliwa, Epoxy resin compositions containing liquid phosphorus flame retardants used in infusion technology , Polimery: Vol. 65 No. 7-8 (2020)
Fatima Hekmat Assal, Ameen Hadi Mohammed, Synthesis and characterizations of poly hydroxybenzyl methacrylate-co-acrylamide based hydrogel as drug delivery system , Polimery: Vol. 70 No. 1 (2025)

<< < 1 2 3 4 5 6 7 8 9 10 > >>

You may also start an advanced similarity search for this article.

Details

References

Statistics

Authors

Download files

PDF (Język Polski)

Zasady cytowania

Garbarski, J., & Fabijański, M. (2022). Properties of high impact polystyrene flame retarded by magnesium hydroxide and modified with triblock copolymer styrene/butadiene/styrene. Polimery, 50(3), 190–195. Retrieved from https://polimery.ichp.vot.pl/index.php/p/article/view/1706

Citing articles via

Statistics

Total abstract views : 0

PDF Downloads : 0

J. Garbarski polimery@ichp.pl

Affiliation
Politechnika Warszawska, Instytut Technologii Materiałowych, ul. Narbutta 85, 02-524 Warszawa

M. Fabijański

Affiliation
Politechnika Warszawska, Instytut Technologii Materiałowych, ul. Narbutta 85, 02-524 Warszawa