Effect of oxazoline grafted polyethylene on the structure and properties of poly(butylene terephthalate)/polyamide 6 blends

R. Jeziórska

Published : 2022-09-01

Vol. 49 No. 5 (2004)

Effect of oxazoline grafted polyethylene on the structure and properties of poly(butylene terephthalate)/polyamide 6 blends

R. Jeziórska

Abstract

Structural phases and blends properties of poly(butylene terephthalate)/polyamide 6 blends were studied in a chemical modification involving reactive extrusion with a ricinol-2-oxazoline methylmaleate (ROM) grafted polyethylene. The interfacial reaction between blend components were studied by differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). The static tensile and flexural properties and impact resistance response of the blends were tested. According to DSC data, the reactive processing results in formation of heterogenous blends. Phase structure and mechanical behavior studies showed that interfacial reactions between PE-g-ROM, poly(butylene terephthalate) and polyamide 6 containing co-reactive groups were effective in the compatibilization of blends investigated. Phase morphology of the blends was of interpenetrating polymer network (IPN) type according to SEM results which was in accordance with learnings from DTA spectra. FT-IR, DSC and DTA investigations suggest evidence for the chemical reaction. The graft polymer formed during the reactive extrusion results in an alloy with good interfacial adhesion and high impact resistance.

Keywords

mieszaniny PBT/PA 6 ; kompatybilizacja ; polietylen małej gęstości ; funkcjonalizowany polietylen ; metylomaleinian rycynolo-2-oksazoliny ; wytłaczanie reaktywne ; morfologia ; właściwości mechaniczne PBT/PA 6 blends ; compatibilization ; oxazoline functionalized low density polyethylene ; ricinol-2-oxazoline methylmaleate ; reactive extrusion ; morphology ; mechanical properties

Similar Articles

J. Paciorek-Sadowska, M. Borowicz, B. Czupryński, J. Liszkowska, E. Tomaszewska, Application of halloysite as filler in the production of rigid PUR-PIR foams , Polimery: Vol. 63 No. 3 (2018)
A. Utrata-Wesołek, Antifouling surfaces in medical application , Polimery: Vol. 58 No. 9 (2013)
M. Łatwińska, J. Sójka-Ledakowicz, M. Kudzin, Influence of poly(3-hydroxybutyrate) addition on the properties of poly(lactic acid) nonwoven obtained by the melt-blown technique , Polimery: Vol. 60 No. 7-8 (2015)
D. Ciechańska, J. Wietecha, M. Kucharska, K. Wrześniewska-Tosik, E. Kopania, Biomass as a source of functional polymeric materials , Polimery: Vol. 59 No. 5 (2014)
P. Postawa, T. Stachowiak, D. Grzesiczak, On-line temperature recording in a multi cooling channel injection molding tool , Polimery: Vol. 60 No. 5 (2015)
A. Makowska, P. Kubiak, W. Białas, G. Lewandowicz, Effect of urea, sodium nitrate and ethylene glycol addition on the rheological properties of corn starch pastes , Polimery: Vol. 60 No. 5 (2015)
B. Ślusarek, M. Karbowiak, B. Jankowski, D. Kapelski, M. Przybylski, Physical properties of permanent magnets for magnetic circuits of electric machines , Polimery: Vol. 58 No. 2 (2013)
D. Kolasa, A. Bajszczak, A. Łukomska, J. Dłubak, Z. Rogulski, S. Kowalska, A. Czerwiński, Analysis of metals content in polyethylene packaging materials in view of the existing legislation , Polimery: Vol. 61 No. 2 (2016)
A. Jaszkiewicz, A. K. Bledzki, P. Franciszczak, Improving the mechanical performance of PLA composites with natural, man-made cellulose and glass fibers — a comparison to PP counterparts , Polimery: Vol. 58 No. 6 (2013)
Marek Bieliński, Artur Kościuszko, Katarzyna Smolińska, Selected performance indices for assessment of polypropylene susceptibility to dyeing by pigments of different UV resistance , Polimery: Vol. 66 No. 1 (2021)

<< < 74 75 76 77 78 79 80 81 82 83 > >>

You may also start an advanced similarity search for this article.

Details

References

Statistics

Authors

Download files

PDF

Zasady cytowania

Jeziórska, R. (2022). Effect of oxazoline grafted polyethylene on the structure and properties of poly(butylene terephthalate)/polyamide 6 blends. Polimery, 49(5), 350–355. Retrieved from https://polimery.ichp.vot.pl/index.php/p/article/view/1761

References

Xanthos M.: "Reactive Extrusion”, Oxford University Press, New York 1992.

2. Gaylord N ., Mishra M. K.: J. Polym. Sci Lett. 1983. 21, 23.

3. Ruggeri 6., Aglietto M., Patragnani A., Ciardelli E: Eur. Polym. J. 1983, 19, 863.

4. Fukuoka T.: Polym. Eng. Sci. 2000, 40, 2511.

5. Maa C. T., Chang F. C.: J. Appl. Polym. Sci. 1993, 49, 913.

6. Datta 5., Lohse D. J.: "Polymeric Compatibilizers". Hanser Publishers 1996.

7. Jeziórska R.: Polimery 2002, 47, 414.

8. Jeziórska R.: Polimery 2003, 48, 130.

9. Ieziórska R.: Macromol. Symp. 2001, 170, 21.

10. Ieziórska R., Zieliński W.: Macromol. Symp. 2001, 169, 97.

11. Jeziórska R., Zielonka M., Szadkowska A.: Prace Naukowe lnstytutu Technologii Organicznej 1 Tworzyw Sztucznych Politechniki Wroclawskiej 50, Seria Konferencje 23, Modyfikacja Polimerów — XV Konferencja Naukowa Wroclaw 2001, p. 163—166.

12. Ieziórska R., Wielgosz Z.: Przem. chem. 2002, 81, 785.

13. Ieziórska R.: Polimery (w druku).

Google Scholar

Citing articles via

Statistics

Total abstract views : 0

PDF Downloads : 0