Przepływ poprzeczny tworzywa w ślimakowym układzie uplastyczniającym

R. Sikora; E. Sasimowski

Published : 2022-09-19

Vol. 46 No. 3 (2001)

Polymer cross flow in the screw-based plasticating system

R. Sikora E. Sasimowski

Abstract

In reference to the comparison of polymer flow velocity along the helical channel in the screw-based plasticating system in dependence on kinematical model used, which was presented in previous publications [1] and [2], further comparative studies on these models for cross flow were executed. Studies were carried out in rectangular and helical coordinate systems for both previously compared models that is for the model with rotating barrel and the model with rotating screw (Fig. 1-4). It has been stated that polymer cross flow velocity and its distribution are different in both models and both coordinate systems (Fig. 5-10). Drag cross flow velocity (the barrel rotates) is higher than redrag polymer flow velocity (the screw rotates) which is caused by different barrel and screw peripheral speeds. In rectangular and helical coordinate systems the highest values of drag (redrag) flow velocities are the same for helical channels of different depths. The distributions of both drag and redrag flow velocities computed in rectangular coordinate system are different than computed in helical coordinate system. The distribution of pressure cross flow velocity computed in rectangular system is different than in helical coordinate system.

Keywords

układy uplastyczniające ; przepływy tworzywa ; model kinematyczny z obracającym się cylindrem ; model kinematyczny z obracającym się ślimakiem ; układy współrzędnych prostokątny i śrubowy plasticating systems ; polymer flows ; kinematical model with rotating barrel ; kinematical model with rotating screw ; rectangular and helical coordinate systems

Similar Articles

K. H. Bodek, Study on the rheological properties of microcrystalline chitosan hydrogels used as drug carriers , Polimery: Vol. 45 No. 11-12 (2000)
St. Fauziah, Nunuk Hariani Soekamto, Budi Prastawa, Herlina Rasyid, Nur Haedar, Muralia Hustim, Marlina Marlina, Magfirah Sulaiman, Ajuk Sapar, Synthesis of molecularly printed methyl methacrylate-based polymers for the detection of di(2-ethylhexyl) phthalate and dibutyl phthalate , Polimery: Vol. 68 No. 7-8 (2023)
E. Bociąga, The effect of mold temperature and injection velocity on selected properties of polyethylene moldings , Polimery: Vol. 45 No. 11-12 (2000)
B. Samujło, Characteristic of the extrusion of polyethylene modified with halogen free flame retardants and additives , Polimery: Vol. 48 No. 7-8 (2003)
Z. Heen, J. Sajewicz, M. Rajkiewicz, Problem of resorcin elimination from adhesive systems for steel cords , Polimery: Vol. 48 No. 9 (2003)
A. Sikorski, Method of Monte Carlo entropy sampling in polymer systems , Polimery: Vol. 45 No. 7-8 (2000)
F. Lembicz, Attempts at ultrasonic-based modeling of selected properties of multiblock elastomers , Polimery: Vol. 45 No. 7-8 (2000)
M. Uhniat, S. Kudła, M. Zemlak, W. Balcerowiak, Rheometric studies on the process of polyethylene or its copolymers' crosslinking in the presence of peroxides. Part III. Effects of the concentration and type of peroxide on the process rate , Polimery: Vol. 49 No. 3 (2004)
B. Kowalska, Processing aspects of p-v-T relationship , Polimery: Vol. 51 No. 11-12 (2006)
Joanna Rokicka, Jolanta Janik, Beata Schmidt, Katarzyna Wilpiszewska, Influence of the ester block polymerization degree on the structure and properties of ester-ether-amide block terpolymers , Polimery: Vol. 69 No. 2 (2024)

<< < 12 13 14 15 16 17 18 19 20 21 > >>

You may also start an advanced similarity search for this article.

Details

Statistics

Authors

Download files

PDF (Język Polski)

Zasady cytowania

Sikora, R., & Sasimowski, E. (2022). Polymer cross flow in the screw-based plasticating system. Polimery, 46(3), 184–191. Retrieved from https://polimery.ichp.vot.pl/index.php/p/article/view/2066

Citing articles via

Statistics

Total abstract views : 0

PDF Downloads : 0