Rubber composites with incorporated magnetic filler

J. Kruželák; R. Dosoudil; R. Sýkora; I. Hudec

doi:10.14314/polimery.2014.819

Published : 2014-12-30

Vol. 59 No. 11-12 (2014)

Rubber composites with incorporated magnetic filler

J. Kruželák R. Dosoudil R. Sýkora I. Hudec

DOI: https://doi.org/10.14314/polimery.2014.819

Abstract

In this study, rubber magnetic composites were prepared by incorporation of strontium ferrite into non-polar and polar rubber matrices. The aim was to investigate the influence of magnetic filler content on the cross-linking and properties of the tested materials. The results demonstrate that the presence of strontium ferrite in rubber matrices leads to a significant increase in the magnetic characteristics of composites. The physical properties of the tested systems seem to be less dependent on magnetic filler content although the improvement of evaluated characteristics with increasing content of ferrite was achieved.

Keywords

rubber magnetic composites ; strontium ferrite ; curing characteristics ; cross-link density ; physical properties of composities ; magnetic properties of composites magnetyczne kompozyty elastomerowe ; ferryt strontu ; charakterystyka sieciowania ; gęstość usieciowania ; właściwości fizyczne kompozytów właściwości magnetyczne kompozytów

Similar Articles

P. Stączek, S. Płaska, Automated control of the preform reheating process in the manufacturing of poly(ethylene terephthalate) containers. Part II. Identification of the dynamical properties of controlled object , Polimery: Vol. 58 No. 2 (2013)
I. Kruszelnicka, M. Michałkiewicz, S. Zajchowski, A. Kloziński, J. Tomaszewska, The use of wood-polymer composites in a Moving Bed Biofilm Reactor Technology , Polimery: Vol. 59 No. 5 (2014)
I. Steinborn-Rogulska, G. Rokicki, Solid-state polycondensation (SSP) as a method to obtain high molecular weight polymers. Part I. Parameters influencing the SSP process , Polimery: Vol. 58 No. 1 (2013)
Z. Bo, L. Jing-wei, L. Shu-guang, L. Yi-hui, H. Ju-tao, Relationship between fracture toughness and temperature in epoxy coatings , Polimery: Vol. 60 No. 4 (2015)
I. Michalska-Pożoga, J. Diakun, Wpływ oddziaływania strefy tarczowej wytłaczarki ślimakowo-tarczowej na strukturę i właściwości wytłoczyny z polietylenu małej gęstości (PE-LD) , Polimery: Vol. 59 No. 11-12 (2014)
P. Horák, H. Beneš, Polyurethane foams based entirely on recycled polyols derived from natural oils , Polimery: Vol. 60 No. 9 (2015)
S. Kugler, T. Spychaj, Carbon nanostructures and films or coatings based on them. Part I. General characteristics, functionalization and methods of research of compositions containing nanotubes or graphenes , Polimery: Vol. 58 No. 2 (2013)
Agata Drogoń, Marcin Skotnicki, Marek Pyda, Physical aging of polylactide-valsartan system investigated by differential scanning calorimetry , Polimery: Vol. 65 No. 7-8 (2020)
P. Król, P. Chmielarz, Synthesis of polystyrene-b-polyurethane-b-polystyrene copolymers through ARGET ATRP polymerization method. Part II. Chemical structure, thermal and surface properties , Polimery: Vol. 60 No. 6 (2015)
Anna Krokos, Agnieszka Bondyra, Ryszard Kwiatkowski, Piotr Gruber, Michał Olejarczyk, Bogusz Stępak, Paulina Dzienny, Bartłomiej Kryszak, Małgorzata Gazińska, Arkadiusz Antończak, Comparison of thermal, structural and morphological properties of poly(l-lactide) and poly(l-lactide)/ hydroxyapatite microspheres for laser sintering processes , Polimery: Vol. 65 No. 9 (2020)

<< < 96 97 98 99 100 101 102 103 104 105 > >>

You may also start an advanced similarity search for this article.

Details

References

Statistics

Authors

Download files

PDF

Zasady cytowania

Kruželák, J., Dosoudil, R., Sýkora, R., & Hudec, I. (2014). Rubber composites with incorporated magnetic filler. Polimery, 59(11-12), 819–824. https://doi.org/10.14314/polimery.2014.819

Altmetric indicators

Citing articles via

Statistics

Total abstract views : 0

PDF Downloads : 0

J. Kruželák jan.kruzelak@stuba.sk

Affiliation
Slovak University of Technology, Faculty of Chemical and Food Technology, Institute of Polymer Materials, Department of Plastics and Rubber, Radlinského 9, 812 37 Bratislava, Slovakia

R. Dosoudil

Affiliation
Slovak University of Technology, Faculty of Electrical Engineering and Information Technology, Department of Electromagnetic Theory, Ifkovièova 3, 812 19, Bratislava, Slovakia

R. Sýkora

Affiliation
Slovak University of Technology, Faculty of Chemical and Food Technology, Institute of Polymer Materials, Department of Plastics and Rubber, Radlinského 9, 812 37 Bratislava, Slovakia

I. Hudec

Affiliation
Slovak University of Technology, Faculty of Chemical and Food Technology, Institute of Polymer Materials, Department of Plastics and Rubber, Radlinského 9, 812 37 Bratislava, Slovakia