Bitumen fluxes of vegetable origin

I. Gawel; J. Pilat; P. Radziszewski; L. Niczke; J. Krol; M. Sarnowski

Published : 2021-08-31

Vol. 55 No. 1 (2010)

Bitumen fluxes of vegetable origin

I. Gawel J. Pilat P. Radziszewski L. Niczke J. Krol M. Sarnowski

Abstract

Methods of preparation of bitumen fluxes from rapeseed and linseed oil methyl esters were developed. The methods consist in the catalytic oxidation of vegetable oil methyl esters in the absence or presence of peroxides as the accelerators. The products obtained can be used as environmentally friendly bitumen fluxes. The rapeseed oil methyl ester has to be oxidized at elevated temperature in the presence of a catalyst. Linseed oil methyl ester does not need pre-oxidation before mixing with bitumen, but mixing with the catalyst is necessary. Contrary to conventional bitumen solvents, the fluxes are not volatile and have an ignition point of approximately 200°, so they do not raise safety problems. The hardening of the fluxed bituminous binder is going not by evaporation of the flux but by oxidative polymerization in the presence of a catalyst. The use of the fluxes let considerably reduce the mixing or spreading temperature of the binder, as well as the compacting temperature of the binder-aggregate mix.

Keywords

upłynniacze asfaltów ; surowce roślinne ; estry metylowe kwasów tłuszczowych ; olej rzepakowy ; olej lniany ; katalityczne utlenianie ; utleniająca polimeryzacja bitumen fluxes ; vegetable raw materials ; fatty acids methyl esters ; rapeseed oil ; linseed oil ; catalytic oxidation ; oxidative polymerization

Similar Articles

M. Wiącek, E. Schab-Balcerzak, Methods of flammability reduction of polystyrene with an important role of chemical modification. Part II. Chemical modifications of polystyrene , Polimery: Vol. 58 No. 4 (2013)
K. Sałasińska, J. Ryszkowska, Dimensional stability, physical, mechanical and thermal properties of high density polyethylene with peanut hulls composites , Polimery: Vol. 58 No. 6 (2013)
T. Biedroń, A. Michalski, T. Biela, P. Kubisa, Stereocomplexation of polylactides containing ionic liquid end-groups , Polimery: Vol. 62 No. 4 (2017)
Łukasz Krysztofik, Blandyna Osowiecka, barbaraliszyńska, Janusz Zieliński, Marcin Zakarzecki, Aqueous emulsions from oxidized polyethylene waxes stabilized with non-ionic agents , Polimery: Vol. 67 No. 6 (2022)
P. Palutkiewicz, T. Garbacz, Assessment of the effectiveness of selected blowing agents in the injection molding of thermoplastic materials , Polimery: Vol. 62 No. 6 (2017)
R. Jeziórska, B. Świerz-Motysia, A. Szadkowska, Modifiers applied in polymer recycling: processing, properties and application , Polimery: Vol. 55 No. 10 (2010)
J. Ryszkowska, K. Sałasińska, Composites of recycled oxo-biodegradable foils filled with wood flour , Polimery: Vol. 55 No. 10 (2010)
Tomasz Gozdek, Joanna Chudzik, Mateusz Imiela, Dariusz M. Bieliński, The influence of the addition of ionic liquids on the properties of rubber-coated fabrics filled with layered fillers , Polimery: Vol. 64 No. 9 (2019)
J. Brzeska, P. Dacko, H. Janeczek, H. Janik, W. Sikorska, M. Rutkowska, M. Kowalczuk, Synthesis, properties and applications of new (bio)degradable polyester urethanes , Polimery: Vol. 59 No. 5 (2014)
I. Kaya, F. Dogan, Synthesis, characterization, and thermal degradation process of poly-4-[(4-hydroxy-2-methylphenyl)irninomethyl]-2,6-dimethylphenol , Polimery: Vol. 55 No. 9 (2010)

<< < 82 83 84 85 86 87 88 89 90 91 > >>

You may also start an advanced similarity search for this article.

Details

Statistics

Authors

Download files

PDF

Zasady cytowania

Gawel, I., Pilat, J., Radziszewski, P., Niczke, L., Krol, J., & Sarnowski, M. (2021). Bitumen fluxes of vegetable origin. Polimery, 55(1), 55–60. Retrieved from https://polimery.ichp.vot.pl/index.php/p/article/view/987

Altmetric indicators

Citing articles via

Statistics

Total abstract views : 0

PDF Downloads : 0

I. Gawel polimery@ichp.pl

J. Pilat

P. Radziszewski

L. Niczke

J. Krol

M. Sarnowski