Niekonwencjonalne sieciowanie mieszanin chlorosulfonowanego polietylenu i karboksylowanego kauczuku butadienowo-akrylonitrylowego

M. Kozioł; W. M. Rzymski

Published : 2022-09-01

Vol. 50 No. 7-8 (2005)

Unconventional crosslinking of the blends of chlorosulfonated polyethylene and carboxylated acrylonitrile-butadiene rubber

M. Kozioł W. M. Rzymski

Abstract

Interpolymeric crosslinking of chlorosulfonated polyethylene/carboxylated acrylonitrile-butadiene rubber blends (CSM/XNBR) (Table 2) with MgO in the presence of stearic acid at temp. 433 K (160 oC) for 30 min has been investigated. Effect of CSM containing various amounts of chlorine bonded (Table 1) on the properties of CSM/XNBR blends was studied as well. Extent of crosslinking was estimated on the basis of determinations of vulcametric torque (L) (Fig. 1), equilibrium swelling (Qv) in selected solvents and sol fraction content (fraction soluble in 2-butanone - S) (Tables 3 and 5). It was found that CSM did not undergo crosslinking in given conditions while in the blend with XNBR the interpolymeric reaction of both elastomers occurred. It was confirmed by bounded chlorine values, S and IR analysis (Fig. 2, Table 4). It was observed that degree of CSM bonding with the network depends on its type and content in the blend. Tensile strength (TSb), elongation at break (Eb) temperature dependence of dynamic loss tangent (tgd) and storage modulus (E') (Fig. 3) were determined using dynamic mechano-thermal analysis (DMTA) of cured CSM/XNBR blends. There were found ionic interpolymeric bonds of structure ~C-CO-O-+Mg+-O-SO2-C~ in cured CSM/XNBR blend [equations (1)-(3)] which gave the blend high mechanical strength and act as chemical compatibilizer.

Keywords

polietylen chlorosulfonowany ; karboksylowany kauczuk butadienowo-akrylonitrylowy ; mieszaniny elastomerów ; sieciowanie ; wiązania interpolimerowe ; właściwości mechaniczne chlorosulfonated polyethylene ; carboxylated acrylonitrile-butadiene rubber ; blends of elastomers ; crosslinking ; interpolymeric bonds ; mechanical properties

Similar Articles

T. Gołofit, K. Gańczyk-Specjalska, K. Jamroga, Ł. Kufel, Rheological and thermal properties of mixtures of hydroxyl-terminated polybutadiene and plasticizer , Polimery: Vol. 63 No. 1 (2018)
Olimpia Markowska, Tadeusz Markowski, Magdalena Sobczyk, Analysis of the mechanical properties of polymer composites for the production of machine parts used as substitutes for elements obtained from metals , Polimery: Vol. 65 No. 4 (2020)
M. J. Halimatul, S. M. Sapuan, M. Jawaid, M. R. Ishak, R. A. Ilyas, Effect of sago starch and plasticizer content on the properties of thermoplastic films: mechanical testing and cyclic soaking-drying , Polimery: Vol. 64 No. 6 (2019)
Małgorzata Szymiczek, Monika Chomiak, Błażej Chmielnicki, Sara Sarraj, Paulina Gołuch, The influence of accelerated aging on selected mechanical properties of polypropylene with organic fillers , Polimery: Vol. 67 No. 7-8 (2022)
J. Pach, J. W. Kaczmar, Influence of the chemical modification of hemp fibers on selected mechanical properties of polypropylene composite materials , Polimery: Vol. 56 No. 5 (2011)
Paweł Wawrzyniak, Waldemar Karaszewski, A literature survey of the influence of preform reheating and stretch blow molding with hot mold process parameters on the properties of PET containers. Part I , Polimery: Vol. 65 No. 5 (2020)
A. Boczkowska, S. Awietjan, Magnetorheological urethane elastomers activated by magnetic field , Polimery: Vol. 54 No. 1 (2009)
Jacek Pacana, Rafał Oliwa, Use of rapid prototyping technology in complex plastic structures Part II. Impact of operating conditions on functional properties of polymer harmonic drives , Polimery: Vol. 64 No. 3 (2019)
S. Kuciel, A. Liber-Kneć, Biocomposites based on PHB filled with wood or kenaf fibers , Polimery: Vol. 56 No. 3 (2011)
R. Steller, D. Żuchowska, W. Meissner, G. Kędziora, Blends of novolac resins with epoxidized elastomers , Polimery: Vol. 57 No. 6 (2012)

<< < 18 19 20 21 22 23 24 25 26 27 > >>

You may also start an advanced similarity search for this article.

Details

References

Statistics

Authors

Download files

PDF (Język Polski)

Zasady cytowania

Kozioł, M., & Rzymski, W. M. (2022). Unconventional crosslinking of the blends of chlorosulfonated polyethylene and carboxylated acrylonitrile-butadiene rubber. Polimery, 50(7-8), 587–592. Retrieved from https://polimery.ichp.vot.pl/index.php/p/article/view/1667

Citing articles via

Statistics

Total abstract views : 0

PDF Downloads : 0

M. Kozioł

Affiliation
Politechnika Łódzka, Instytut Polimerów, ul. Stefanowskiego 12/16, 90-924 Łódź

W. M. Rzymski rzymski@p.lodz.pl

Affiliation
Politechnika Łódzka, Instytut Polimerów, ul. Stefanowskiego 12/16, 90-924 Łódź