Niekonwencjonalne sieciowanie mieszanin chlorosulfonowanego polietylenu i karboksylowanego kauczuku butadienowo-akrylonitrylowego

M. Kozioł; W. M. Rzymski

Published : 2022-09-01

Vol. 50 No. 7-8 (2005)

Unconventional crosslinking of the blends of chlorosulfonated polyethylene and carboxylated acrylonitrile-butadiene rubber

M. Kozioł W. M. Rzymski

Abstract

Interpolymeric crosslinking of chlorosulfonated polyethylene/carboxylated acrylonitrile-butadiene rubber blends (CSM/XNBR) (Table 2) with MgO in the presence of stearic acid at temp. 433 K (160 oC) for 30 min has been investigated. Effect of CSM containing various amounts of chlorine bonded (Table 1) on the properties of CSM/XNBR blends was studied as well. Extent of crosslinking was estimated on the basis of determinations of vulcametric torque (L) (Fig. 1), equilibrium swelling (Qv) in selected solvents and sol fraction content (fraction soluble in 2-butanone - S) (Tables 3 and 5). It was found that CSM did not undergo crosslinking in given conditions while in the blend with XNBR the interpolymeric reaction of both elastomers occurred. It was confirmed by bounded chlorine values, S and IR analysis (Fig. 2, Table 4). It was observed that degree of CSM bonding with the network depends on its type and content in the blend. Tensile strength (TSb), elongation at break (Eb) temperature dependence of dynamic loss tangent (tgd) and storage modulus (E') (Fig. 3) were determined using dynamic mechano-thermal analysis (DMTA) of cured CSM/XNBR blends. There were found ionic interpolymeric bonds of structure ~C-CO-O-+Mg+-O-SO2-C~ in cured CSM/XNBR blend [equations (1)-(3)] which gave the blend high mechanical strength and act as chemical compatibilizer.

Keywords

polietylen chlorosulfonowany ; karboksylowany kauczuk butadienowo-akrylonitrylowy ; mieszaniny elastomerów ; sieciowanie ; wiązania interpolimerowe ; właściwości mechaniczne chlorosulfonated polyethylene ; carboxylated acrylonitrile-butadiene rubber ; blends of elastomers ; crosslinking ; interpolymeric bonds ; mechanical properties

Similar Articles

K. Królikowski, K. Piszczek, Separation of high-density polyethylene/poly(ethylene terephthalate)/poly(vinyl chloride) mixtures based on differences in their hardness , Polimery: Vol. 62 No. 7-8 (2017)
M. Masłowski, M. Zaborski, Effect of thermooxidative and photooxidative ageing processes on mechanical properties of magnetorheological elastomer composites , Polimery: Vol. 60 No. 4 (2015)
J. Pigłowski, A. Kiersnowski, J. Dołęga, Preparation, structure and useful properties of poly(e-caprolactone)/layered silicates nanocomposites , Polimery: Vol. 51 No. 10 (2006)
A. Pawlak, J. Morawiec, E. Piorkowska, A. Galeski, Nanocomposites of polypropylene and polyethylene with montmorillonite type clays , Polimery: Vol. 49 No. 4 (2004)
F. Lembicz, Attempts at ultrasonic-based modeling of selected properties of multiblock elastomers , Polimery: Vol. 45 No. 7-8 (2000)
Kailasam Chandrasekaran, Periyasamy Shanmugam , Palanisamy Senthilkumar, Mechanical and thermal properties of cotton-bamboo fabric/glass fiber epoxy composites , Polimery: Vol. 67 No. 11-12 (2022)
Hafsa Jamshaid, Abdul Waqar Rajput, Bilal Zahid, Sanam Memon, Raja Fahad Qureshi, Sarmad Aslam, Muhammad Nadeem, The effect of basalt knitted fabric on the properties of green epoxy resin , Polimery: Vol. 67 No. 2 (2022)
D. E. El-Nashar, N. N. Rozik, S. L. Abd El-Messieh, Mechanical and electrical properties of acrylonitrile-butadiene rubber filled with treated nanographite , Polimery: Vol. 59 No. 11-12 (2014)
C. Dębek, J. Magryta, Influence of oil adsorption on the dynamic properties of vulcanates of natural rubber and natural rubber/butadiene-acrylonitrile mixtures , Polimery: Vol. 55 No. 3 (2010)
A. Liber-Kneć, S. Kuciel, W. Dziadur, Estimation of mechanical (static and dynamic) properties of recycled polypropylene filled with wood flour , Polimery: Vol. 51 No. 7-8 (2006)

<< < 4 5 6 7 8 9 10 11 12 13 > >>

You may also start an advanced similarity search for this article.

Details

References

Statistics

Authors

Download files

PDF (Język Polski)

Zasady cytowania

Kozioł, M., & Rzymski, W. M. (2022). Unconventional crosslinking of the blends of chlorosulfonated polyethylene and carboxylated acrylonitrile-butadiene rubber. Polimery, 50(7-8), 587–592. Retrieved from https://polimery.ichp.vot.pl/index.php/p/article/view/1667

Citing articles via

Statistics

Total abstract views : 0

PDF Downloads : 0

M. Kozioł

Affiliation
Politechnika Łódzka, Instytut Polimerów, ul. Stefanowskiego 12/16, 90-924 Łódź

W. M. Rzymski rzymski@p.lodz.pl

Affiliation
Politechnika Łódzka, Instytut Polimerów, ul. Stefanowskiego 12/16, 90-924 Łódź