Heterofazowe termoplastyczne kompozycje polimerowe modyfikowane odpadami gumowymi

E. Kowalska; M. Żubrowska; M. Borensztejn

Published : 2022-09-17

Vol. 48 No. 9 (2003)

Heterophase thermoplastic polymer compositions modified with rubber wastes

E. Kowalska M. Żubrowska M. Borensztejn

Abstract

The results of own research concerning new polymeric compositions based fully on secondary materials, obtained by physical modification, were presented. Recycled thermoplastics - PE-LD or PVC (Table 1) - were used as polymer matrix. Ground vulcanized rubber wastes of tires as well as thermally modified phosphogypsum (Table 2 and 3) or activated chalk were used as the fillers. Mechanical properties of such compositions (Table 4 and 5) and possibilities of their practical applications, with utilization of specific properties coming from the materials used, were discussed. It has been found that porous hoses made of such cornpositions show the properties qualifying them for use in the irrigation systems (Fig. 6). The compositions discussed can be also used as the fillers of noise damping screens (Fig. 7), fillers of columns for biological waste-water purification (Fig. 8) as well as for producing of the traffic safety devices or floorings.

Keywords

odpadowy polietylen ; polichlorek winylu ; napełniane kompozycje termoplastyczne ; odpady gumowe ; fosfogips ; właściwości użytkowe ; możliwości zastosowania PE wastes ; PVC wastes ; filled thermoplastic compositions ; rubber wastes ; phosphogypsum ; useful properties ; application possibility

Similar Articles

K. Bajer, R. Malinowski, D. Bajer, S. Richert, Properties of poly(lactic acid)/Ecoflex rigid foil sheets applied in thermof orming process , Polimery: Vol. 55 No. 7-8 (2010)
Magdalena Stepczyńska, Influence of active compounds on the degradation of polylactide biocomposites , Polimery: Vol. 64 No. 6 (2019)
D. Marciniak, P. Szewczykowski, P. Czyżewski, D. Sykutera, M. Bieliński, Effect of surface modification by acetone vaporization on the structure of 3D printed acrylonitrile-butadiene-styrene elements , Polimery: Vol. 63 No. 11-12 (2018)
Jolanta Świderska, Waldemar Świderski, Adrian Antosik, Effect of radiation source distance on the properties of dental fillings , Polimery: Vol. 64 No. 7-8 (2019)
Maciej Kabziński, Krzysztof Neupauer, Marcelina Nowak, Joanna Kruk, Kacper Kaczmarczyk, The impact of addition of xanthan gum and guar gum on rheological properties of foams produced by continuous method , Polimery: Vol. 64 No. 7-8 (2019)
J. Brzeska, P. Dacko, H. Janeczek, M. Kowalczuk, H. Janik, M. Rutkowska, The influence of synthetic polyhydroxybutyrate on selected properties of novel polyurethanes for medical applications. Part I. Polyurethanes with aromatic diisocyanates in hard segments , Polimery: Vol. 55 No. 1 (2010)
M. Podgórski, J. Księżopolski, Study of the effect of polymer network structure on thermal and mechanical properties of crosslinked (meth)acrylates - cis-hexahydrophthalic anhydride derivatives , Polimery: Vol. 55 No. 1 (2010)
E. Malewska, M. Trzyna, A. Sabanowska, A. Prociak, P. Koniorczyk, The influence of expandable polystyrene fillers on properties of water-blown rigid polyurethane foams , Polimery: Vol. 56 No. 11-12 (2011)
A. H. Mohammed, M. B. Ahmad, N. A. Ibrahim, N. Zainuddin, Synthesis and properties of vinylpyrrolidone/ (trimethoxysilyl)propyl methacrylate gels containing different amounts of crosslinking agent , Polimery: Vol. 63 No. 9 (2018)
M. Kurańska, A. Prociak, S. Michałowski, A. Zawadzińska, The influence of blowing agents type on foaming process and properties of rigid polyurethane foams , Polimery: Vol. 63 No. 10 (2018)

<< < 33 34 35 36 37 38 39 40 41 42 > >>

You may also start an advanced similarity search for this article.

Details

Statistics

Authors

Download files

PDF (Język Polski)

Zasady cytowania

Kowalska, E., Żubrowska, M., & Borensztejn, M. (2022). Heterophase thermoplastic polymer compositions modified with rubber wastes. Polimery, 48(9), 633–640. Retrieved from https://polimery.ichp.vot.pl/index.php/p/article/view/1908

Citing articles via

Statistics

Total abstract views : 0

PDF Downloads : 0

E. Kowalska polimery@ichp.pl

Affiliation
Instytut Chemii Przemysłowej im. Prof. Ignacego Mościckiego, ul. Rydygiera 8, 01-793 Warszwawa, Poland

M. Żubrowska

M. Borensztejn