Epoxy-carbazole compositions. Part I. Compositions with 9-(2, 3-epoxypropyl) carbazole

P. Czub; W. Mazela; J. Pielichowski

Published : 2022-09-17

Vol. 48 No. 9 (2003)

Epoxy-carbazole compositions. Part I. Compositions with 9-(2, 3-epoxypropyl) carbazole

P. Czub W. Mazela J. Pielichowski

Abstract

Compositions of low-molecular weight epoxy resin Ruetapox 0162 mixed with various amounts of 9-(2,3-epoxypropyl)carbazole (EPK) have been prepared and cured by isophorone diamine. Mechanical, thermal and photoluminescence properties of obtained materials were determined. It was found that low- molecular weight epoxy resin is an excellent dispersing matrix for carbazole groups, which secures suitable mechanical properties, low combustibility and high thermal stability of prepared materials. Moreover, it was observed that the addition of 10 wt. % of EPK improves compression strength by 15%, flexural strength by 33% and also slightly decreases water absorption. Thin film forming ability and optic properties, characteristic for isolated carbazole molecules (photoluminescence maxima at 352 and 368 nm), point at the possibility to use studied materials for light-emitting diodes (LED) construction.

Keywords

żywice epoksydowe ; 9-(2,3-epoksypropylo)karbazol ; diody świecące ; właściwości mechaniczne ; właściwości termiczne ; właściwości fotoluminescencyjne epoxy resins ; 9-(2;3-epoxypropyl)carbazole ; light-emitting diodes ; mechanical properties ; thermal properties ; photoluminescence properties

Similar Articles

Tadeusz Sanocki, Marek Sanocki, Agnieszka Sanocka-Zajdel, Henryk Majcherczyk, Magdalena Zajdel, Katarzyna Bulanda, Rafał Oliwa, Mariusz Oleksy, Grzegorz Budzik, Monika Stącel, Hybrid polymer materials with substantially improved mechanical properties obtained by SPLAST , Polimery: Vol. 70 No. 3 (2025)
A. M. Noor Azammi, S. M. Sapuan, M. R. Ishak, M. T. H. Sultan, Mechanical properties of kenaf fiber thermoplastic polyurethane-natural rubber composites , Polimery: Vol. 63 No. 7-8 (2018)
K. Gawdzińska, A. Gądek-Moszczak, K. Bryll, I. Irska, S. Paszkiewicz, Influence of water absorption on chosen strength properties of single-polymer polyester composites , Polimery: Vol. 63 No. 4 (2018)
M. Kwiatkowska, I. Kowalczyk, A. Szymczyk, K. Gorący, Effect of thermal aging on the crystalline structure and mechanical performance of fully bio-based, furan-ester, multiblock copolymers , Polimery: Vol. 63 No. 9 (2018)
G. Budzik, M. Magniszewski, Ł. Przeszłowski, M. Oleksy, R. Oliwa, J. Bernaczek, Torsional strength testing of machine elements manufacture by incremental technology from polymeric materials , Polimery: Vol. 63 No. 11-12 (2018)
J. Czech-Polak, B. Przybyszewski, M. Heneczkowski, A. Czulak, M. Gude, Effect of environmentally-friendly flame retardants on fire resistance and mechanical properties of rigid polyurethane foam , Polimery: Vol. 61 No. 2 (2016)
D. Marciniak, P. Szewczykowski, P. Czyżewski, D. Sykutera, M. Bieliński, Effect of surface modification by acetone vaporization on the structure of 3D printed acrylonitrile-butadiene-styrene elements , Polimery: Vol. 63 No. 11-12 (2018)
J. Liszkowska, B. Czupryński, J. Paciorek-Sadowska, Temperature stability and thermal properties of polyurethane-polyisocyanurate foams obtained using products of citric acid condensation , Polimery: Vol. 63 No. 7-8 (2018)
M.J. Suriani, S.M. Sapuan, C.M. Ruzaidi, J. Naveen, H. Syukriyah, M. Ziefarina, Correlation of manufacturing defects and impact behaviors of kenaf fiber reinforced hybrid fiberglass/Kevlar polyester composite , Polimery: Vol. 66 No. 1 (2021)
Maciej Mrówka , Tomasz Machoczek , Małgorzata Szymiczek , Przemysław Gągol , Sławomir Duda , Łukasz Marcoll , Surface treatment of incrementally produced components in FFF (Fused Filament Fabrication) technology , Polimery: Vol. 65 No. 1 (2020)

<< < 20 21 22 23 24 25 26 27 28 29 > >>

You may also start an advanced similarity search for this article.

Details

Statistics

Authors

Download files

PDF (Język Polski)

Zasady cytowania

Czub, P., Mazela, W., & Pielichowski, J. (2022). Epoxy-carbazole compositions. Part I. Compositions with 9-(2, 3-epoxypropyl) carbazole. Polimery, 48(9), 641–644. Retrieved from https://polimery.ichp.vot.pl/index.php/p/article/view/1909

Citing articles via

Statistics

Total abstract views : 0

PDF Downloads : 0

P. Czub pczub@usk.pk.edu.pl

Affiliation
Cracow University of Technology, Independent Department of Chemistry and Technology of Polymers, ul. Warszawska 24, 31-155 Kraków, Poland

W. Mazela

J. Pielichowski