Wpływ warunków termomechanicznej regeneracji miału gumowego na właściwości otrzymywanych regeneratów gumowych

K. Formela; M. Bogucki; P. Stączek

doi:10.14314/polimery.2015.057

Published : 2015-01-30

Vol. 60 No. 1 (2015)

Effect of the conditions of thermomechanical reclaiming of ground tire rubber on the properties of reclaimed rubber materials

K. Formela M. Bogucki P. Stączek

DOI: https://doi.org/10.14314/polimery.2015.057

Abstract

Thermomechanical reclaiming of ground tire rubber (GTR) was performed using a co-rotating twin screw extruder. Based on response surface methodology (RSM) the influence of reclaiming conditions (temperature of barrel, screw rotational speed, feed rate) on the processing (screw torque) and properties of reclaimed rubber (acetone extract content, sol fraction, Mooney viscosity, torque increment ΔM and optimal vulcanization time) were determined. It was found that barrel temperature is the main factor affecting the thermomechanical reclaiming process and quality of reclaimed rubber.

Keywords

odpady gumowe ; recykling materiałowy ; wytłaczanie dwuślimakowe ; metoda powierzchni odpowiedzi rubber ; material recycling ; twin-screw extrusion ; response surface methodology

Similar Articles

Oliwia Trzaska, Roman Wróblewski, Alina Czekaj, Joanna Czyż, Jacek W. Kaczmar, The effect of methods of surface treatment of metal elements on their surface free energy, with a view to the formation of polymer–metal hybrid elements , Polimery: Vol. 65 No. 11-12 (2020)
Hanan Al-Otaibi, Rafal Basaqer, Sarah Almania, Afnan Alfouzan, Sara Al Taweel, Huda Alshehri, Nawaf Labban, Effect of acidic saliva on monomer leaching and surface roughness of 3D-printed and milled denture-base materials , Polimery: Vol. 68 No. 3 (2023)
I. Ofat, J. Kozakiewicz, Modification of epoxy-polyester and polyester powder coatings with silicone-acrylic nanopowders – effect on surface properties of coatings , Polimery: Vol. 59 No. 9 (2014)
B. Gutarowska, M. Piotrowska, Z. Żakowska, K. Gwoździński, Analysis of the usefulness of adenosine triphosphate (ATP) determination and fluorescence microscopy methods for the evaluation of the viability and adesion of bacteria on the surface of bioactive polymers , Polimery: Vol. 57 No. 3 (2012)
Rydzkowski Tomasz, Sławomir Kulesza , Mirosław Bramowicz , Iwona Michalska-Pożoga, Atomic force microscopy with fractal studies of temperature induced changes in the surface topography of polymeric materials , Polimery: Vol. 65 No. 1 (2020)
Paweł Turek, Evaluation of surface roughness parameters of anatomical structures models of the mandible made with additive techniques from selected polymeric materials , Polimery: Vol. 67 No. 4 (2022)
A. Utrata-Wesołek, Antifouling surfaces in medical application , Polimery: Vol. 58 No. 9 (2013)
R. Jeziórska, Recycling of multilayer films by reactive extrusion , Polimery: Vol. 48 No. 2 (2003)
K. Formela, M. Bogucki, Use of response surface methodology in characterization of properties of recycled high density polyethylene/ground tire rubber compositions , Polimery: Vol. 59 No. 6 (2014)
M. Zielecka, R. Jeziórska, E. Bujnowska, B. Kępska, M. Wenda, Silica nanofillers with immobilized silver or copper nanoparticles synthesized by sol-gel method , Polimery: Vol. 57 No. 3 (2012)

1 2 3 4 5 6 7 8 9 10 > >>

You may also start an advanced similarity search for this article.

Details

References

Statistics

Authors

Download files

PDF (Język Polski)

Zasady cytowania

Formela, K., Bogucki, M., & Stączek, P. (2015). Effect of the conditions of thermomechanical reclaiming of ground tire rubber on the properties of reclaimed rubber materials. Polimery, 60(1), 57—65. https://doi.org/10.14314/polimery.2015.057

References

Sikora J.W.: Polym. Eng. Sci. 2008, 48, 1678. http://dx.doi.org/10.1002/pen.20998

[2] Stasiek J.: Przem. Chem. 2010, 89, 135.

[3] Sikora R., Sasimowski E., Sikora J.W.: Polimery 2011, 56, 591.

[4] Wilczyński K., Lewandowski A., Wilczyński K.J.: Polym. Eng. Sci. 2012, 52, 1258. http://dx.doi.org/10.1002/pen.23076

[5] Parasiewicz W., Mężyński J., Niciński K., Ostaszewska U.: Elastomery 2011, 15 (1), 16.

[6] Si H., Chen T., Zhang Y.: J. Appl. Polym. Sci. 2013, 128, 2307. http://dx.doi.org/10.1002/app.38170

[7] Tao G., He Q., Xia Y., Jia G., Yang H., MaW.: J. Appl. Polym. Sci. 2013, 129, 2598. http://dx.doi.org/10.1002/app.38976

[8] Wang X., Shi C., Hang L., Zhang Y.: J. Appl. Polym. Sci. 2013, 130, 1845. http://dx.doi.org/10.1002/app.39253

[9] Sutanto P., Picchioni F., Janssen L.P.B.M.: Chem. Eng. Sci. 2006, 61, 7077. http://dx.doi.org/10.1016/j.ces.2006.07.012

[10] Yazdani H., Karrabi M., Ghasmi I., Azizi H., Bakhshandeh G.H.: J. Vinyl Add. Technol. 2011, 17, 64. http://dx.doi.org/10.1002/vnl.20257

[11] Maridass B., Gupta B.R.: Kautsch. Gummi Kunstst. 2003, 56, 232.

[12] Maridass B., Gupta B.R.: Polymer Test. 2004, 23, 377. http://dx.doi.org/10.1016/j.polymertesting.2003.10.005

[13] Maridass B., Gupta B.R.: Polimery 2007, 52, 456.

[14] Maridass B., Gupta B.R.: Polym. Comp. 2008, 29, 1350. http://dx.doi.org/10.1002/pc.20379

[15] Yazdani H., Ghasmi I., Karrabi M., Azizi H., Bakhshandeh G.H.: J. Vinyl Add. Technol. 2013, 19, 65. http://dx.doi.org/10.1002/vnl.20322

[16] Stasiek J., Bajer K., Stasiek A., Bogucki M.: Przem. Chem. 2012, 91, 224.

[17] Formela K., Kołacka K., Stankiewicz P., Haponiuk J., Stasiek A.: Przem. Chem. 2012, 91, 1770.

[18] Formela K., Cysewska M., Haponiuk J., Stasiek A.: Przem. Chem. 2012, 91, 2398.

[19] Formela K., Bogucki M., Stasiek A., Cysewska M., Haponiuk J.: Przem. Chem. 2013, 92, 342.

[20] Formela K., Cysewska M., Haponiuk J., Stasiek A.: Polimery 2013, 58, 906. http://dx.doi.org/10.14314/polimery.2013.906

[21] Myers R.H., Montgomery D.C.: “Response surface methodology, process and product optimization using designed experiments”, 2-nd edition, J. Wiley & Sons, New York 2002.

[22] Montgomery D.C.: “Design and analysis of experiments”, 5-th edition, J. Wiley & Sons, New York 2001.

[23] Gibala D., Hamed G.R.: Rubber Chem. Tech. 1994, 67, 636. http://dx.doi.org/10.5254/1.3538699

[24] Gibala D., Laohapisitpanich K., Thomas D., Hamed G.R.: Rubber Chem. Tech. 1996, 69, 115. http://dx.doi.org/10.5254/1.3538351

Google Scholar

Altmetric indicators

Citing articles via

Statistics

Total abstract views : 0

PDF Downloads : 0

K. Formela kformela.ktp@gmail.com

Affiliation
Politechnika Gdańska, Wydział Chemiczny, Katedra Technologii Polimerów, ul. Narutowicza 11/12, 80-233 Gdańsk

M. Bogucki

Affiliation
Politechnika Lubelska, Wydział Mechaniczny, Katedra Automatyzacji, ul. Nadbystrzycka 36, 20-618 Lublin

P. Stączek

Affiliation
Politechnika Lubelska, Wydział Mechaniczny, Katedra Automatyzacji, ul. Nadbystrzycka 36, 20-618 Lublin