Selected properties of recycled polypropylene obtained from porous injection molded parts

D. Sykutera; M. Bieliński

doi:10.14314/polimery.2014.602

Published : 2014-08-30

Vol. 59 No. 7-8 (2014)

Selected properties of recycled polypropylene obtained from porous injection molded parts

D. Sykutera M. Bieliński

DOI: https://doi.org/10.14314/polimery.2014.602

Abstract

In this work the influence of blowing agents residues on the density and melt flow rate (MFR) of the polypropylene (PP) moldings was investigated. A standard methodology to determine the density of polymeric porous material was used. The amount of blowing agent residues was indicated by the melt flow rate (MFR) change of PP moldings. The aim of the research was to explore and understand the phenomena occurring during the formation of the porous structure due to the decomposition of chemical blowing agents in the injection molding process. Special attention was paid to the influence of holding pressure and plasticizing temperature as well as the molding temperature onto the intensity of PP pore creation. Specially designed test stand for porous materials cutting and grinding was used for PP moldings.

Keywords

chemical blowing agent ; polypropylene ; grinding ; recyclate ; foam injection molding porofory chemiczne ; polipropylen ; rozdrabnianie ; recyklat ; wtryskiwanie porujące

Details

References

Statistics

Authors

Download files

PDF

Zasady cytowania

Sykutera, D., & Bieliński, M. (2014). Selected properties of recycled polypropylene obtained from porous injection molded parts. Polimery, 59(7-8), 602–605. https://doi.org/10.14314/polimery.2014.602

References

Thermoplastische Partikel-schaumstoffe, VDIVerlag, 1993.

[2] Kozłowski M., Kozłowska A., Frąckowiak S.: Polimery 2010, 55, 726.

[3] Bieliński M.: „Techniki porowania tworzyw termoplastycznych”, WU ATR, Bydgoszcz 2004.

[4] Bieliński M., Muzyczuk P.: Polimery 2011, 56, 309.

[5] Bieliński M., Kotewicz P.: Inż. Ap. Chem. 2010, 49, 20.

[6] Bociąga E., Palutkiewicz P.: Polimery 2011, 56, 749.

[7] Bociąga E., Palutkiewicz P.: Polimery 2012, 57, 38, http://dx.doi.org/10.14314/polimery.2012.038

[8] Bociąga E., Palutkiewicz P.: Polym. Eng. Sci. 2013, 53, 780, http://dx.doi.org/10.1002/pen.23316

[9] Garbacz T.: Polimery 2013, 58, 295, http://dx.doi.org/10.14314/polimery.2013.295

[10] Lubke G.: Kunststoffe 2002, 92, 79.

[11] Sikora R.: Polimery 1996, 41, 694.

[12] Michaeli W., Pfannschmidt W., Habibi-Naini S.: Kunststoffe 2002, 92, 48.

[13] Information materials of companies Clariant and Lifocolor.

[14] Sykutera D.: Rozprawy, nr 169, WU UTP, Bydgoszcz 2013.

[15] Sykutera D.: Ing. Ap. Chem. 2005, 44, 78.

Google Scholar

Altmetric indicators

Citing articles via

Statistics

Total abstract views : 0

PDF Downloads : 0

D. Sykutera polimery@ichp.pl

Affiliation
University of Technology and Life Sciences, Faculty of Mechanical Engineering, Department of Plastics Processing, Prof. Kaliskiego 7, 85-796 Bydgoszcz, Poland

M. Bieliński

Affiliation
University of Technology and Life Sciences, Faculty of Mechanical Engineering, Department of Plastics Processing, Prof. Kaliskiego 7, 85-796 Bydgoszcz, Poland